Standard Plans - FY 2021-22 Errata
The Standard Plans Indexes on the website have been updated to contain the Errata listed below. The only action required by the user is to replace any copies of affected sheets (listed below) that were downloaded prior to the Errata Date. Last updated: 01/06/2025 |
|---|
Errata for Road Construction |
| Index Redline | Sheets | Errata Date | Index Title | Description |
| 000-525 | 1 and 2 of 5 | 09/09/2021 | Ramp Terminals | Corrected the Flexible Pavement Thickness Transition dimension alignment. |
| 000-525 | 2 of 5 | 05/09/2023 | Ramp Terminals | Corrected dimension in the THREE THRU LANES-APPROACH AUXILIARY LANE detail. |
| 102-600 | 7, 8, and 9 of 11 | 12/17/2020 and 09/24/2021 | General Information for Traffic Control Through Work Zones | Sheet 7: Clarified CHANNELIZING DEVICES NOTE for paved shoulders less than 4'; Sheet 8: Corrected the Table reference in Notes 2, 5, and 6; Corrected the Sheet reference in the DROP-OFF CONDITION DETAIL. Sheet 9: Corrected Table Reference in the PLAN VIEW in the TEMPORARY LANE SEPARATOR details. |
| 102-603 | All | 07/13/2022 | Two-Lane, Two-Way Work Within The Travel Way | Changed the Shoulder Taper from L/3 to 25'-50'. |
| 102-606 | 1 of 1 | 07/13/2022 | Two-Lane Roadway, Lane Closure Using Temporary Traffic Signals | Changed the Shoulder Taper from L/3 to 25'-50'. |
| 102-607 | 1 of 2 | 12/14/2020 | Mobile Operations | Clarified "Arrow Board" for the Shadow Vehicle in the WORK IN TRAVELED WAY- TWO-LANE ROADWAY, LANE CLOSURE detail. |
| 102-613 | 5 of 5 | 2/24/2021 | Multilane Roadway, Lane Closures | Corrected Right Shoulder Closed sign reference; Corrected spelling in Note 1. |
| 425-010 | 3 of 4 | 11/19/2020 | Structure Bottom Type J and P | Corrected typographical error in TABLE 4. |
| 425-022 | 2 of 2 | 12/22/2020 | Curb Inlet Type 7 | Corrected dimension in SECTION A-A and the MANHOLE MODIFICATION details. |
| 425-023 | 2 of 2 | 12/22/2020 | Curb Inlet Type 8 | Corrected dimension in SECTION A-A and the MANHOLE MODIFICATION details. |
| 425-030 | 2 of 4 | 12/22/2020 | Median Barrier Inlet Types 1 and 2 | Corrected dimensions in TYPE 1 INLET - SECTION A-A and the TYPE 2 INLET - SECTION B-B details. |
| 425-031 | 2 of 4 | 12/22/2020 | Adjacent Barrier Inlet | Corrected dimensions in the DIMENSIONAL AND REINFORCEMENT - SECTION A-A details. |
| 425-032 | 2 of 4 | 12/22/2020 | Curb and Gutter Barrier Inlet | Corrected dimensions in the DIMENSIONAL AND REINFORCEMENT - SECTION A-A details. |
| 425-052 | 2-6 of 14 | 7/12/2021 | Ditch Bottom Inlet Type C,D,E, and H | Sheet 2: Corrected the rebar location in Section B-B. |
| 425-052 | 1 of 14 | 12/03/2021 | Ditch Bottom Inlet Type C,D,E, and H | Corrected callouts for the "Grate" location and deleted the "Slot" callout in the DITCH BOTTOM INLET TYPE C-TRAVERSABLE detail. |
| 425-052 | 1 of 10 | 12/10/2021 | Ditch Bottom Inlet Type C,D,E, and H | Corrected Table 10; Deleted Note 1. |
| 425-052 | 1 of 14 | 03/30/2022 | Ditch Bottom Inlet Type C,D,E, and H | Corrected Table 13 - Slab Thickness. |
| 425-052 | 6 of 14 | 01/06/2025 | Ditch Bottom Inlet Type C,D,E, and H | Corrected the bottom C-I-P dimension in Section R-R. |
| 425-054 | 2 of 4 | 11/02/2020 | Ditch Bottom Inlet Type J | Corrected dimensions in DETAIL "A". |
| 425-055 | 2 of 4 | 12/22/2020 | Ditch Bottom Inlet Type K | Corrected dimension in the FRONT ELEVATION detail. |
| 425-060 | 4 of 4 | 08/12/2021 | Back of Sidewalk Drainage | Corrected note reference to (See Note 1) in the YARD DRAINS-ELEVATION Details. |
| 425-060 | 2 of 4 | 08/17/2021 | Back of Sidewalk Drainage | Corrected the dimension in the SLAB REINFORCEMENT detail. |
| 425-080 | 2 of 2 | 08/17/2021 | Utility Conflict Thru Drainage Structures | Corrected dimensions in the CONDITION II-SIDE ELEVATION to show the dimensions to the outside diameter of the Steel Sleeve. |
| 443-001 | 1 of 3 | 06/2/2021 | French Drain | Corrected the General Notes and Table of Contents |
| 430-022 | 4 of 7 | 07/29/2021 | Side Drain Mitered End Section | Corrected Dimension "C" to "A" in the Elevation view in the ROUND CORRUGATED PIPE detail. |
| 430-030 | 3 and 4 of 4 | 02/15/23 | Straight Concrete Endwalls-Single Multiple Pipe | Sheet 3: Corrected dimension reference in Note 1. Sheet 4: Correct reference in the Legend and the dimension in the SKEWED PIPE PLAN detail. |
| 520-020 | 3 and 4 of 5 | 04/28/2021 | Traffic Separators | Corrected rebar count in OPTION II. |
| 521-001 | 1 of | 10/28/2021 | Concrete Barrier | Corrected GENERAL NOTE 9. |
| 522-001 | 1 of 2 | 12/10/20 | Concrete Sidewalk | Corrected dimensions in the RAILING DETAIL. |
| 536-002 | 1 and 15 of 28 | 01/05/2021 | Guardrail Transitions and Connections for Existing Bridges | Deleted Note 6; Corrected Index reference in SCHEME 1. |
| 646-001 | 1 of 1 | 9/15/2021 | Aluminum Post and Pedestal Mounted Pedestrian Detectors and signals | Corrected all pole callouts to match pole callouts in the PEDESTAL MOUNTED detail. |
| 659-010 | 1 of 1 | 12/22/2022 | Span Wire Mounted Sign Details | Corrected the Min. Clearance dimension in the TYPICAL INSTALLATION detail. |
| 700-040 | 2 of 5 | 01/26/2021 | Cantilever Sign Structure | Corrected the 'FL' Bars Callout to 'FC' in the DRILLED SHAFT: ELEVATION and PLANS details. |
| 700-090 | 1 of 5 | 03/16/2022 | Dynamic Message Sign Walk-in | Corrected Note 5.A.b ASTM reference. |
| 700-101 | 1 of 1 | 11/25/2020 | Typical Sections for Placement of Single and Multi-Column Signs | Added Note 8 and Highlighted sign dimensions for CASE X for clarification. |
| 700-102 | 8 and 10 of 12 | 12/10/2020 | Special Sign Details | Sheet 8: Corrected dimension on FTP-68C-21; Sheet 10: Corrected dimension on FTP-85-15, FTP-86-21, and FTP-89-21. |
| 700-120 | 9 of 10 | 11/25/2020 | Enhanced Highway Signing Assemblies | Moved sign height dimension to Index 700-101 and added “See Index 700-101” for clarification. |
| 706-001 | 2 of 6 | 03/23/2021 | Typical Placement of Raised Pavement Markers | Added the Wrong-Way Arrow detail for clarification. Detail was previously only shown with Interchange Markings. |
| 711-002 | 1 of 2 | 02/22/2021 | Bicycle Markings | Deleted "For Shared Use Path Only" from the Railroad Crossing detail. |
| 711-003 | 2, 3, 5, and 6 of 8 | 11/05/2020 | Interchange Markings | Sheet 2: Added Subtitle to "Two-Lane Parallel Type Entrance With Added Lane" detail and Note 3 for clarification. Sheet 3: Corrected dimension in DETAIL “A”. Sheet 5 and 6: Corrected Delineator symbol print error. |
|
|---|
Errata for Bridge Construction |
| 521-422 | 1 of 3 | 5/20/2021 | Traffic Railing - (42" Vertical Shape) | Corrected Index reference in Note 2. |
| 521-423 | 1 of 3 | 5/20/2021 | Traffic Railing - (32" Vertical Shape) | Corrected Index reference in Note 2. |
| 521-426 | 1 of 4 | 5/20/2021 | Traffic Railing - (Median 36" Single-Slope) | Corrected Index reference in Note 2. |
| 521-427 | 1 of 5 | 5/20/2021 | Traffic Railing - (36" Single-Slope) | Corrected Index reference in Note 2. |
| 521-428 | 1 of 4 | 5/20/2021 | Traffic Railing - (42" Single-Slope) | Corrected Index reference in Note 2. |