2932 search results for forms
D4500000.do
Guidelines. 450-6 Forms. 450-6.1 G e n e r a l : U s e metal side and bottom forms, unless otherwise, , wood forms are permitted. Slab units and sheet piles may be cast on concrete surfaces meeting, . Forallbeam members, use side forms designed to be removed without damaging the top flange of the beam. Remove the forms horizontally away from the beam by a method that prevents any contact, and inside forms, other materials capable of resisting the pressure from concrete are permitted
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2003/january-2003/workbook/d4500000.do.pdf?sfvrsn=c9a6feab_0D4520000.do
and core forms all designed and assembled into a machine for making a single superstructure segment. A casting cell for a substructure pier shaft segment consists of exterior and interior side forms, shop drawings, calculations, casting manuals, concrete forms and concreting operations, responsibility for the design and engineering of the forms as well as their construction. Form all, concrete surface textures, color, and appearance. Obtain the Engineer’s approval of forms prior
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2004/january-2004/workbook/d4520000.do571f5ddb0a18491d97d08dcbf65fb0f9.pdf?sfvrsn=6ee1eeb7_00020000.impl
in the Contractor Pre-Qualification System. 2-2 Proposals. 2-2.1 Obtaining Proposal Forms: Obtain Proposal Forms under the conditions stipulated in the Advertisement. The Advertisement states, or not. Uponadvertising,theDepartment will make the Proposal Forms available for download as an electronic file from the Online Ordering System or provide the Proposal Forms on portable electronic, , who has ordered and obtained the Proposal Forms, to submit the Proposal. TheDepartment
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2016/july-2016/review/implemented/0020000.impl.pdf?sfvrsn=71f48ca6_0SS4520000
and interior side forms and a narrow cast-in-place joint between each segment. (During erection, all, and core forms all designed and assembled into a machine for making a single superstructure segment, . Components are not interchangeable and must comply with the crete forms and concreting, concrete surface textures, color, and appearance. Obta Engineer’s approval of forms prior to initiating ca Cct orasamended by approved Shop Drawings into the forms. Repairworn, damaged, or otherwise
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2007/january-2007/workbook/ss4520000.pdf?sfvrsn=2fd15b09_0Section82V2-725
of incidental precast concrete products, including but not limited to: materials, pre-pour forms, in accordance with the manufacturer’s instructions. Concrete Forms Provide concrete forms made of wood, 400 . Forms used in the manufacture of Products shall be sufficiently rigid and accurate to maintain the Product’s designed dimensions and avoid irregularities in the Product surface. Forms, that the condition of all forms are of a quality to produce acceptable Products within the dimensional
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/review/material-manual/section82v2-7250a67a232-de0c-443a-a378-0ac4ca57a6b4.pdf?sfvrsn=61a1a121_1Section82V2-725
of incidental precast concrete products, including but not limited to: materials, pre-pour forms, in accordance with the manufacturer’s instructions. Concrete Forms Provide concrete forms made of wood, 400 . Forms used in the manufacture of Products shall be sufficiently rigid and accurate to maintain the Product’s designed dimensions and avoid irregularities in the Product surface. Forms, that the condition of all forms are of a quality to produce acceptable Products within the dimensional
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/review/material-manual/section82v2-725.pdf?sfvrsn=2394842d_15210000.FHWA
and details shown in the Plans. Use stationary removable forms or sliding forms to construct the barrier, removable forms or slip form construction methods provided a completed barrier wall with acceptable alignment and finish is obtained. Construct forms of metal or timber with a form liner. Do not use forms, barrier wall constructed using stationary forms in accordance with Section 400 and providinge a Class, with an expansion filler material or removable forming materials and secure to the forms as required
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2014/july-2014/review/fhwa/5210000.fhwa.pdf?sfvrsn=b7a8824b_0Section82V2cln
to: materials, pre-pour forms, reinforcing steel/fiber placement, concrete placement, curing, Forms Provide concrete forms made of wood, metal, or other materials meeting the requirements of this Section and FDOT Specifications Section 400 . Forms used in the manufacture of Products shall, irregularities in the Product surface. Forms not meeting governing document requirements shall be repaired or removed from service. Ensure that the condition of all forms are of a quality to produce
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2021/january-2021/materials-manual/section82v2cln.pdf?sfvrsn=dfe98392_2Section 8.2 VII-122
-pour forms, reinforcing steel/fiber placement, concrete placement, curing, and post- placement, with the manufacturer’s instructions. Concrete Forms Provide concrete forms made of wood, metal, or other materials meeting the requirements of this Section and FDOT Specifications Section 400 . Forms, ’s designed dimensions and avoid irregularities in the Product surface. Forms not meeting governing, forms are of a quality to produce acceptable Products within the dimensional tolerances. The QC
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/january-2022/materials-manual/section-8-2-vii-122.pdf?sfvrsn=316313cd_2SectionMM82V2
but not limited to: materials, pre-pour forms, reinforcing steel/fiber placement, concrete placement, curing, . Concrete Forms Provide concrete forms made of wood, metal, or other materials meeting the requirements of this Section and FDOT Specifications Section 400 . Forms used in the manufacture of Products, irregularities in the Product surface. Forms not meeting governing document requirements shall be repaired or removed from service. Ensure that the condition of all forms are of a quality to produce
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2020/july-2020/materials-manual/sectionmm82v2.pdf?sfvrsn=ed6c0289_2Section8.2V2-721cln
-pour forms, reinforcing steel/fiber placement, concrete placement, curing, and post- placement, with the manufacturer’s instructions. Concrete Forms Provide concrete forms made of wood, metal, or other materials meeting the requirements of this Section and FDOT Specifications Section 400 . Forms, ’s designed dimensions and avoid irregularities in the Product surface. Forms not meeting governing, forms are of a quality to produce acceptable Products within the dimensional tolerances. The QC
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2021/july-2021/materials-manual/section8-2v2-721cln.pdf?sfvrsn=a4b1391c_2Section82V2-722cln
to: materials, pre-pour forms, reinforcing steel/fiber placement, concrete placement, curing, and post, be stored in accordance with the manufacturer’s instructions. Concrete Forms Provide concrete forms made of wood, metal, or other materials meeting the requirements of this Section and FDOT Specifications Section 400 . Forms used in the manufacture of Products shall be sufficiently rigid, surface. Forms not meeting governing document requirements shall be repaired or removed from service
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/july-2022/materials-manual/section82v2-722cln.pdf?sfvrsn=a2b47e99_2Section82V2-723cln
but not limited to: materials, pre-pour forms, reinforcing steel/fiber placement, concrete placement, reinforcement shall also be stored in accordance with the manufacturer’s instructions. Concrete Forms Provide concrete forms made of wood, metal, or other materials meeting the requirements of this Section and FDOT Specifications Section 400 . Forms used in the manufacture of Products shall, irregularities in the Product surface. Forms not meeting governing document requirements shall be repaired
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2023-24/materials-manual/section82v2-723cln.pdf?sfvrsn=7e1eeb16_2Section82V2-724cln
-pour forms, reinforcing steel/fiber placement, concrete placement, curing, and post- placement, : July 1, 2024 Volume II: Incidental Precast Concrete Products 8-2-9 Concrete Forms Provide concrete forms made of wood, metal, or other materials meeting the requirements of this Section and FDOT Specifications Section 400 . Forms used in the manufacture of Products shall be sufficiently rigid, surface. Forms not meeting governing document requirements shall be repaired or removed from
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2024-25/materials-manual/section82v2-724cln.pdf?sfvrsn=214af736_1Section82V2-725cln
but not limited to: materials, pre-pour forms, reinforcing steel/fiber placement, concrete, with the manufacturer’s instructions. Concrete Forms Provide concrete forms made of wood, metal, or other materials meeting the requirements of this Section and FDOT Specifications Section 400 . Forms, designed dimensions and avoid irregularities in the Product surface. Forms not meeting governing, forms are of a quality to produce acceptable Products within the dimensional tolerances. The QC
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/materials-manual/section82v2-725cln.pdf?sfvrsn=6cc7227e_1Section82V2-726redln
but not limited to: materials, pre-pour forms, reinforcing steel/fiber placement, concrete, with the manufacturer’s instructions. Concrete Forms Provide concrete forms made of wood, metal, or other materials meeting the requirements of this Section and FDOT Specifications Section 400 . Forms, designed dimensions and avoid irregularities in the Product surface. Forms not meeting governing, forms are of a quality to produce acceptable Products within the dimensional tolerances. The QC
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2026-27/review/materials-manual/section82v2-726redln.pdf?sfvrsn=2c10b4a7_10020000.FHWA
System. 2-2 Proposals. 2-2.1 Obtaining Proposal Forms: Obtain a pProposal Forms under the conditions, and print a proposal form for submittalmake the Proposal Forms available for download as an electronic file from the Online Ordering System or provide the Proposal Forms on portable electronic media, has ordered and obtained the Proposal Forms, to submit the Proposal. TheDepartment, diskette or CD- ROMreplacement Proposal Forms. If the b B i d der requests a replacement Proposal
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2016/july-2016/review/fhwa/0020000.fhwa.pdf?sfvrsn=c856b822_0Special Provisions Workbook January 2017
a copy of the permit is http://www.dep.state.fl.us/water/stormwater/npdes/permits_forms.htm
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2017/january-2017/workbook/special-provisions-workbook-january-2017.pdf?sfvrsn=f3e8a328_14500100.origind
‐ incomplete forms will be returned) Contact the State Specifications Office for assistance, substituted: 450-6.1 General: Use metal side and bottom forms, unless otherwise specified in the Contract Documents. For members with special shapes such as corner sheet piles, wood forms, Jobs Forallbeammembers, use side forms designed to be removed without damaging the top flange of the beam. Remove the forms horizontally away from the beam by a method that prevents any contact
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2016/july-2016/review/internal/4500100.origind.pdf?sfvrsn=6ec1feb3_05210000.FHWA2
shown in the Plans. Use stationary removable forms or sliding forms to construct the barrier wall, forms or slip form construction methods provided a completed barrier wall with acceptable alignment and finish is obtained. Construct forms of metal or timber with a form liner. Do not use forms which, wall constructed using stationary forms in accordance with Section 400 and providinge a Class, with an expansion filler material or removable forming materials and secure to the forms as required
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2014/july-2014/review/fhwa/5210000.fhwa2.pdf?sfvrsn=20b9451_0