This table provides brief clarifications to the works that are allowed to be performed by Contractor's Engineer of Record, Department Approved Specialty Engineer and Specialty Engineer as defined in Specification Section 1. For definitions, additional information and further clarifications refer to Specification Section 1.
|Work Type||Contractor's Engineer of Record||Department ApprovedSpecialty Engineer||Specialty Engineer|
|Cost Savings Initiative Proposal||Yes||No||No|
|Details of the permanent work not fully detailed in the plans||Yes||Yes||Yes|
|Design and details of the permanent work declared to be minor or non-structural including minor repairs||Yes||Yes||Yes|
|Design and details of the permanent work declared to be major or structural including major repairs||Yes||Yes*||No|
|Design and drawings of temporary works, such as falsework, formwork, etc.||Yes||Yes||Yes|
|*The work must also be checked by another Department Approved Specialty Engineer|