1780 search results for work mix
SP0090103LS-122origind
and the following substituted: 9-1.3 Determination of Pay Reduction: In measurement of areas of work, where, measured along the final surface of the completed work within the neat lines shown in the Contract, of the finished work as the Engineer determines. Failure on the part of the Contractor to construct any item of work to plan or authorized dimensions within the Specification tolerances will result, materials and for performing all work contemplated and embraced under the Contract; also for all loss
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/january-2022/review/internal/sp0090103ls-122origind.pdf?sfvrsn=485f7977_21-12DBBoilerplate9-7-11
to perform work are written in the active voice-imperative mood. These directions to the Contractor, adjusted score. Advertisement. Thepublicannouncement, as required by law, inviting bids for work, Bidder. Anindividual, firm, or corporation submitting a proposal for the proposed work. The word “Bidder” is also be deemed to include a Design-Build Firm submitting a proposal for the proposed work, , including, but not limited to, the performance of the Work and the basis of payment. Contract Claim
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2012/january-2012/design-build/1-12dbboilerplate9-7-11.pdf?sfvrsn=1be92904_02024 SRES Final Report
................................................................................. 12 Figure 10. Work Program Allocation by Work Mix Type, Average, : • General Economic Landscape for highway construction materials, • Work Program Work Mix, CONSTRUCTION A summary of FDOT’s Five-year Work Program (including P3 projects) by Work Mix Type, -loaded in the early years of the work program are likely to support higher structural steel prices, expects continued high demand, supporting higher prices in the early years of the work program
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/forecasting-and-performance/forecasting-and-project-cost/reports/strategic-resource-evaluation-study-reports/fact-sheets/2024-sres-final-report.pdf?sfvrsn=ed925375_1Section82V2-725
8.2.6.3 . Review of the Plant’s Proposed QC Plan In the QC Plan, include the work experience, discontinues his/her work without advanced notice, the Plant is required to notify the DMRO within two, and verification of concrete mixes, and may evaluate the plant’s repair methods and their implementation. Level, with the applicable Specifications and Contract Documents . Pre-mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied, and cured in accordance
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/review/material-manual/section82v2-7250a67a232-de0c-443a-a378-0ac4ca57a6b4.pdf?sfvrsn=61a1a121_1Section82V2-725
8.2.6.3 . Review of the Plant’s Proposed QC Plan In the QC Plan, include the work experience, discontinues his/her work without advanced notice, the Plant is required to notify the DMRO within two, and verification of concrete mixes, and may evaluate the plant’s repair methods and their implementation. Level, with the applicable Specifications and Contract Documents . Pre-mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied, and cured in accordance
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/review/material-manual/section82v2-725.pdf?sfvrsn=2394842d_1Section82V2cln
In the QC Plan, include the work experience, qualifications, and responsibilities of the Plant’s, the Plant’s assigned QC manager discontinues his/her work without advanced notice, the Plant is required, , level II QC inspectors may be involved in the design and verification of concrete mixes, and may, shall comply with the applicable Specifications and Contract Documents . Pre-mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied, and cured
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2021/january-2021/materials-manual/section82v2cln.pdf?sfvrsn=dfe98392_2Section 8.2 VII-122
Plan, include the work experience, qualifications, and responsibilities of the Plant’s production, manager discontinues his/her work without advanced notice, the Plant is required to notify the DMRO, inspectors may be involved in the design and verification of concrete mixes, and may evaluate the plant’s, Documents . Pre-mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied, and cured in accordance with the manufacturer’s recommendations. Cosmetic
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/january-2022/materials-manual/section-8-2-vii-122.pdf?sfvrsn=316313cd_2SectionMM82V2
, include the work experience, qualifications, and responsibilities of the Plant’s production and QC, and QC issues. When the Plant’s assigned QC manager discontinues his/her work without advanced notice, inspectors, level II QC inspectors may be involved in the design and verification of concrete mixes, compounds shall comply with the applicable Specifications and Contract Documents . Pre-mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2020/july-2020/materials-manual/sectionmm82v2.pdf?sfvrsn=ed6c0289_2Section8.2V2-721cln
Plan, include the work experience, qualifications, and responsibilities of the Plant’s production, manager discontinues his/her work without advanced notice, the Plant is required to notify the DMRO, inspectors may be involved in the design and verification of concrete mixes, and may evaluate the plant’s, Documents . Pre-mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied, and cured in accordance with the manufacturer’s recommendations. Cosmetic
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2021/july-2021/materials-manual/section8-2v2-721cln.pdf?sfvrsn=a4b1391c_2Section82V2-722cln
. Review of the Plant’s Proposed QC Plan In the QC Plan, include the work experience, qualifications, assigned QC manager discontinues his/her work without advanced notice, the Plant is required to notify, QC inspectors may be involved in the design and verification of concrete mixes, and may evaluate, comply with the applicable Specifications and Contract Documents . Pre-mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied, and cured
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/july-2022/materials-manual/section82v2-722cln.pdf?sfvrsn=a2b47e99_2Section82V2-723cln
. Review of the Plant’s Proposed QC Plan In the QC Plan, include the work experience, qualifications, . When the Plant’s assigned QC manager discontinues his/her work without advanced notice, the Plant, inspectors, level II QC inspectors may be involved in the design and verification of concrete mixes, patching compounds shall comply with the applicable Specifications and Contract Documents . Pre-mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2023-24/materials-manual/section82v2-723cln.pdf?sfvrsn=7e1eeb16_2Section82V2-724cln
with Section 8.2.6.3 . Review of the Plant’s Proposed QC Plan In the QC Plan, include the work experience, to the DMRO. When the Plant’s assigned QC manager discontinues his/her work without advanced notice, inspectors may be involved in the design and verification of concrete mixes, tensioning and detensioning, comply with the applicable Specifications and Contract Documents . Pre-mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied, and cured
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2024-25/materials-manual/section82v2-724cln.pdf?sfvrsn=214af736_1Section82V2-725cln
. Review of the Plant’s Proposed QC Plan In the QC Plan, include the work experience, qualifications, to the DMRO. When the Plant’s assigned QC manager discontinues his/her work without advanced notice, mixes, and may evaluate the plant’s repair methods and their implementation. Level II inspectors, -mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied, and cured in accordance with the manufacturer’s recommendations. All defects shall
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/materials-manual/section82v2-725cln.pdf?sfvrsn=6cc7227e_1Section8.2-051518_1-19WB
In the QCP include the work experience, qualifications, and responsibilities of the Plant’s production, deficiencies and QC issues. When the Plant’s assigned QC manager discontinues his/her work without, mixes, and may evaluate the plant’s repair methods and their implementation. Level II inspectors, with the applicable Specifications and Contract Documents. Pre-mixed packaged compounds may be used, when listed on the current APL . Patch material shall be mixed, applied, and cured in accordance
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2019/january-2019/materials-manual/section8-2-051518_1-19wb.pdf?sfvrsn=4f62b49f_1Section8.2-051518_1-19WB
In the QCP include the work experience, qualifications, and responsibilities of the Plant’s production, deficiencies and QC issues. When the Plant’s assigned QC manager discontinues his/her work without, mixes, and may evaluate the plant’s repair methods and their implementation. Level II inspectors, with the applicable Specifications and Contract Documents. Pre-mixed packaged compounds may be used, when listed on the current APL . Patch material shall be mixed, applied, and cured in accordance
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2019/july-2019/materials-manual/section8-2-051518_1-19wb.pdf?sfvrsn=67247f68_1Section82V2-726redln
. Review of the Plant’s Proposed QC Plan In the QC Plan, include the work experience, qualifications, to the DMRO. When the Plant’s assigned QC manager discontinues his/her work without advanced notice, mixes, and may evaluate the plant’s repair methods and their implementation. Level II inspectors, -mixed packaged compounds may be used, when listed on the current APL. Patch material shall be mixed, applied, and cured in accordance with the manufacturer’s recommendations. All defects shall
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2026-27/review/materials-manual/section82v2-726redln.pdf?sfvrsn=2c10b4a7_1SP0090103LS
of work, where pay reductions are to be assessed, the Engineer will use the lengths and/or widths, dimensions measured along the final surface of the completed work within the neat lines shown, of the finished work as the Engineer determines. Failure on the part of the Contractor to construct any item of work to plan or authorized dimensions within the Specification tolerances will result, for furnishing all materials and for performing all work contemplated and embraced under the Contract; also
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/july-2018/workbook/sp0090103ls.pdf?sfvrsn=4b7c7253_01050803.FHWA
Technician, available at the asphalt plant at all times when producing mix for the Department. Perform, on the roadway at all times when placing asphalt mix for the Department, and perform all testing with a CTQP, Technician at the roadway. 105-8.65.3 Mix Designer: Ensure all mix designs are developed by individuals who are CTQP qualified as an Asphalt Hot Mix Designer. 105-8.65.4 Documentation: Document all QC, of engineering that the construction work involves such as Civil, Electrical or Mechanical. Under certain
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2016/january-2016/review/fhwa/1050803.fhwa.pdf?sfvrsn=8f408c22_0SS9710000
Mixing: All paints shall be delivered to the project completely mixed, and ready to be used without, and ready mixed. Upon curing, these materials shall produce an adherent, reflective pavement marking, mixed. Upon curing, these materials shall produce an adherent, reflective pavement marking capable, Percentages are by weight. Thealkyd/maleic binder must consist of a mixture of synthetic resins, Material-Hot Spray. 971-6.1 General: This work shall consist of furnishing and applying thermoplastic
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2009/january-2009/workbook/ss971000025e8f832f06c49e086123c705459ebf6.pdf?sfvrsn=411c12ed_0SS9710000
Mixing: All paints shall be delivered to the project completely mixed, and ready to be used without, and ready mixed. Upon curing, these materials shall produce an adherent, reflective pavement marking, mixed. Upon curing, these materials shall produce an adherent, reflective pavement marking capable, Percentages are by weight. Thealkyd/maleic binder must consist of a mixture of synthetic resins, Material-Hot Spray. 971-6.1 General: This work shall consist of furnishing and applying thermoplastic
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2009/january-2009/workbook/ss9710000.pdf?sfvrsn=5f2866e4_0