9191 search results for test
9910100-723comm
9910100 CHANNELIZING DEVICE MATERIALS COMMENTS FROM INTERNAL/INDUSTRY REVIEW Craig Schulz (253) 284-8005 Craig.Schulz@pexco.com Comments: (10-11-22 Industry) We have made this point several times about the elimination of Asphalt testing, the recommendation for Texas A&M Transportation institute even recommended this. In doing this you are disregarding that Asphalt is 90% plus of the roadways, asphalt testing is much tougher to pass. Below is an excerpt from 607532-02 Phase 2 – from
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2023-24/review/comments-responses/9910100-723comm50105260baa044a0998a0b2710a06e69.pdf?sfvrsn=e1b016a9_2BDV30-977-27_Final Report
resistance, test piles were constructed for the second phase of impact testing. These test piles adhered, for phase 1 impact tests. However, impact load on phase 2 test piles was delivered by a 6000-lbm, , the same orientation of the impact test setup described for phase 1 impact tests (Figure 4.12, ) For the phase 2 impact tests, PDA instrumentation was installed on both sides of the tested piles, 4 ft from, (Roddenberry et al., 2014) was also to be tested. In contrast, Phase 2 focused exclusively on impact tests
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/structures/innovation/frp/bdv30-977-27_final-report.pdf?sfvrsn=b2024ae8_1SPM4270000-724-i19416
Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test is applied after each section has been completed and not before 30 minutes have elapsed, in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered with the corresponding, and ensure the test valve is tight before fitting the seal in place. Locate the test valve
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2024-25/maintenance/finalized/spm4270000-724-i19416.pdf?sfvrsn=6b123346_1SPM4270000-725-i19886
Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test is applied after each section has been completed and not before 30 minutes have elapsed, in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered with the corresponding, and ensure the test valve is tight before fitting the seal in place. Locate the test valve
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/maintenance/finalized/spm4270000-725-i19886.pdf?sfvrsn=1b900a03_1SSM4270000-723-i18613
pounds per square inch. Do not exceed 10 pounds per square inch. 427-7.2 Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test, in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered with the corresponding, the test valve is tight before fitting the seal in place. Locate the test valve in the seal
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2023-24/maintenance/finalized/ssm4270000-723-i18613.pdf?sfvrsn=99541889_2SSM4270000-122
per square inch. Do not exceed 10 pounds per square inch. 427-7.2 Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test, in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered with the corresponding joint, the test valve is tight before fitting the seal in place. Locate the test valve in the seal at either
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/january-2022/maintenance/finalized/ssm4270000-122.pdf?sfvrsn=4eea932d_2SSM4270000-722-i17982
per square inch. Do not exceed 10 pounds per square inch. 427-7.2 Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test, in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered with the corresponding joint, the test valve is tight before fitting the seal in place. Locate the test valve in the seal at either
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/july-2022/maintenance/finalized/ssm4270000-722-i17982.pdf?sfvrsn=f802d1f5_2SSM4270000-721
per square inch. Do not exceed 10 pounds per square inch. 427-7.2 Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test, in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered with the corresponding joint, the test valve is tight before fitting the seal in place. Locate the test valve in the seal at either
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2021/july-2021/maintenance/finalized/ssm4270000-721.pdf?sfvrsn=6550aeec_2SS4270000-i16482
Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test is applied after each section has been completed and not before 30 minutes have, to assist in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered, and ensure the test valve is tight before fitting the seal in place. Locate the test valve
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2021/january-2021/maintenance/finalized/ss4270000-i16482.docx?sfvrsn=8d34924c_2SS4270000
Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test is applied after each section has been completed and not before 30 minutes have, to assist in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered, and ensure the test valve is tight before fitting the seal in place. Locate the test valve
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2020/july-2020/maintenance/finalized/ss4270000.docx?sfvrsn=c1690e6f_2SS4270000.review
square inch. 427-7.2 Flexible Seal Testing: There are two individual pressure tests applied, test is applied to outer edge and entire body of the seal. The Engineer may request proper testing, to assist in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered with the corresponding, to clearly define the seal position. Check the seal for any damage and ensure the test valve is tight
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/january-2018/maintenance/review-package/ss4270000.review.pdf?sfvrsn=dc02202a_0SS4270000clean
and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each, Seal Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test is applied after each section has been completed and not before 30 minutes have, . Check the seal for any damage and ensure the test valve is tight before fitting the seal in place. Locate the test valve in the seal at either the 9 o’clock or 3 o’clock position. Position
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/january-2018/maintenance/implemented/ss4270000clean.pdf?sfvrsn=5f36f438_0SS4270000
Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test is applied after each section has been completed and not before 30 minutes have elapsed, in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered with the corresponding, and ensure the test valve is tight before fitting the seal in place. Locate the test valve in the seal
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2020/january-2020/maintenance/ss4270000.pdf?sfvrsn=a450d8e4_3SS4270000
Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing, of the joint to assist in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered, the seal for any damage and ensure the test valve is tight before fitting the seal in place. Locate the test valve in the seal at either the 9 o’clock or 3 o’clock position. Position the seal parallel
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2019/july-2019/maintenance/finalized/ss4270000a05fb7fd97474873b16e1882f2b3bb38.pdf?sfvrsn=9aca7f7c_3SS4270000
Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing, of the joint to assist in making the fit between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered, the seal for any damage and ensure the test valve is tight before fitting the seal in place. Locate the test valve in the seal at either the 9 o’clock or 3 o’clock position. Position the seal parallel
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2019/january-2019/maintenance/finalized/ss4270000471d99a3-56d4-4708-868d-cc5ce0ce4ad4.pdf?sfvrsn=565a9e76_2SS4270000
the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests, Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test is applied after each section has been completed and not before 30, position. Check the seal for any damage and ensure the test valve is tight before fitting the seal in place. Locate the test valve in the seal at either the 9 o’clock or 3 o’clock position. Position
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/july-2018/maintenance/finalized/ss4270000.pdf?sfvrsn=24a6b9df_1SS4270000
the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests, Flexible Seal Testing: There are two individual pressure tests applied to the seal before closing the pipeline. The first test is applied after each section has been completed and not before 30, position. Check the seal for any damage and ensure the test valve is tight before fitting the seal in place. Locate the test valve in the seal at either the 9 o’clock or 3 o’clock position. Position
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/january-2018/maintenance/finalized/ss4270000.pdf?sfvrsn=99595664_1SPM4270000-726
pressure tests applied to the seal before closing the pipeline. The first test is applied after, between the seal and pipe airtight. A test air valve must be installed in the seal for conducting pressure tests. Each joint seal must be clearly numbered with the corresponding joint number, area to clearly define the seal position. Check the seal for any damage and ensure the test valve is tight before fitting the seal in place. Locate the test valve in the seal at either the 9 o’clock
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2026-27/maintenance/finalized/spm4270000-726.pdf?sfvrsn=ea88406c_21050806-724IMPL
testing, and the recording/reporting of all test data. SUBARTICLE 105-8.7.1 is deleted, : 105-8.6.1 Concrete Field Technician - Level 1: Ensure technicians performing plastic property testing, Technician Level 1 qualification. Plastic property testing will include but not be limited to slump, concrete cylinders. Duties include initial sampling and testing to confirm specification compliance prior, Technician - Level 1: Ensure technicians performing plastic property testing on self-consolidating
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2024-25/review/implemented/1050806-724impl.pdf?sfvrsn=d7fc56cd_19290101-724CommResp
: - Proposed concrete/mortar testing requirements are more demanding and will take longer time to get, concrete is a new addition to the testing requirements. As total chloride varies with concrete mix design and constituent materials, it is better to test chloride content of coal ash itself. - 85% strength, /mortar testing needs to be more clear what ash type falls under this testing requirement. The proposed section mentioned Class C coal ash for this testing requirement. It is not clear if this applies
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2024-25/review/comments-responses/9290101-724commresp.pdf?sfvrsn=a41bd77c_1