Note: The below Independent Assurance Checklists, which are sorted by test method, are provided as Adobe Acrobat PDF files that require the free Acrobat Reader Software. All files range in size from 10KB to 100KB.



Title

Procedure Checklist

Equipment Checklist

Quality Systems

Quality Systems Manual

N/A

Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

N/A

Checklist for Laboratory Paperwork

N/A

Paperwork Review Checklist

N/A

Determination of Organic Content in Soils by Loss on Ignition

 

Corrosion Research Laboratory 

Florida Method of Test for Determining Low-Levels of Chloride in Concrete and Raw Materials

 N/A

Qualification: Aggregate Base Testing

Dry Preparation of Disturbed Soil and Soil Aggregate Samples for Test

Hydrometer

Liquid Limit of Soils

Plastic Limit and Plasticity Index of Soils

The Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in) Drop

Laboratory Determination of Moisture Content of Soils

Determination of Water (Moisture) Content of Soil by Microwave Oven Heating

Sampling Aggregates

N/A

Moisture-Density Relations of Soils Using a 4.54 Kg (10 lb) Rammer and a 457 mm (18 in.) Drop

Reducing Aggregate Samples to Testing Size

Qualification: Aggregate Information Only

 

Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

 

Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

Qualification: Aggregate Testing Technician

 

Organic Impurities in Fine Aggregate for Concrete

 

Sieve Analysis of Fine and Coarse Aggregate

 

Total Moisture Content of Aggregate by Drying

Sampling Aggregates

N/A

Total Materials Finer than 75-μm (No. 200) Sieve

 

Specific Gravity and Absorption of Fine Aggregate

 

Specific Gravity and Absorption of Coarse Aggregate

 

Reducing Aggregate Samples to Testing Size

Qualification: Asphalt Paving Level I

Measurement of Pavement Smoothness with the 15-ft [4.572-m] Rolling Straightedge

Qualification: Asphalt Plant Level I

Gyratory Compaction

 

Mechanical Analysis of Extracted Aggregate

 

Bulk Specific Gravity

 

Sampling Bituminous Paving Materials

 

Maximum Specific Gravity of Bituminous Paving Mixtures

 

Asphalt Content by Ignition Oven

Qualification: Concrete Field Technician Level I

 

Making and Curing Concrete Test Specimens in the Field

Density (Unit Weight), Yield and Air Content (Gravimetric) of Concrete 

 

Slump of Hydraulic Cement Concrete

 

Sampling Freshly Mixed Concrete

Air Content of Freshly Mixed Concrete by the Volumetric Method

 

Air Content of Freshly Mixed Concrete by Pressure Method

 

Temperature of Freshly Mixed Hydraulic-Cement Concrete

 

Water Cementitious Ratio

N/A

Qualification: Concrete Laboratory Technician Level I and Level II

 

Making and Curing Concrete Test Specimens in the Field

N/A

 

Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

 

Standard Practice for Capping Cylindrical Specimens

 

Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders  

Qualification: Earthwork Inspection Level I

 

Density of Soils in Place by the Nuclear Method

 

Determination of Moisture Content by means of a Calcium Carbide Gas Pressure Moisture Tester (Speedy Method)

 

Reporting Test Results in Density Record System

N/A

 

Sampling of Earthwork

N/A

Qualification: Earthwork Inspection Level II

 

Thickness Determination in Soil-Aggregate Bases Procedure Checklist

N/A

Qualification: LBR Technician

 

Limerock Bearing Ratio

Qualification: Qualified Sampler

Sampling Aggregates

Sampling of Earthwork 

N/A

 

Reducing Aggregate Samples to Testing Size