9274 search results for test

2018_FDOT_Load_Rating_Manual

, excepting certain LRFR Service tests, the Routine Permit Level is equivalent to the Operating Level

2016_Load_Rating_Manual_09-26-16

. Rating Level, Routine Permit—in Florida, excepting certain LRFR Service tests, the Routine Permit Level

0020000.origind

that may be subjected to the tests provided for in these Specifications to determine the materials

0020000SS

in the construction of the work, together with samples that may be subjected to the tests provided

0020000.impl

to the tests provided for in these Specifications to determine the materials’ quality and fitness

0020000SS

in the construction of the work, together with samples that may be subjected to the tests provided

FMPP July 2025 Meeting Summary Distribution

(2) Driving tests for the elderly Hands-free driving/not using a cell phone (11) Peer influence

FDOTStormWaterMgmtPlan2012

. Test should be performed to determine if directly contaminated soils should be handled as a hazardous

CompleteDesignBuildProcedure021408

and conceptual drawings to eliminate any contradictions in the documents for testing. Testing requirements, to include a test plan for determination of level of experience and networking knowledge. 11, including field office requirements, specific testing requirements, signal timings responsibilities

FDOT Local Agency Procurement Manual

D7 SR55 (US 19) unsuitable mat'l removal

Proctor Density Test to the bottom of pavement. Backfill outside of pavement areas shall, Density Test. The cost of backfill shall be included in the unit price bid per lineal foot

1020504.FHWA

during an off-peak period with a minimum three detections for each signal phase. Perform the test, for each signal phase. Perform the test in the presence of the Engineer. SUBARTICLE 102-11.14

5440000.resp

states: ….Manufacturers seeking evaluation of their crash cushions shall furnish certified test reports showing that their products meet all test requirements of NCHRP 350 or the Manual for Assessing

1020504.fhwa

during an off-peak period with a minimum three detections for each signal phase. Perform the test, for each signal phase. Perform the test in the presence of the Engineer. SUBARTICLE 102-11.14

1020509.origind

certified test reports showing that their product meets all test requirements set forth by NCHRP 350

6030000.FHWA

the construction progress allows or as designated in the Contract Documents. The Department will test, . The Department will test and certify the equipment to be in proper condition and ready to use

SS1020302

) and current FHWA directives. Manufacturers seeking evaluation must furnish certified test reports showing that their product meets all test requirements set forth by NCHRP 350 or the MASH

LAP120

Class Maximum Lift Thickness Thick Lift Control Test Section Requirements 1 A-3 12 inches Not Needed A-2-4 (No. 200 Sieve ≤ 15%) 2 A-1 6 inches without Control Test Section Maximum of 12 inches

LAP1200000

Class Maximum Lift Thickness Thick Lift Control Test Section Requirements 1 A-3 12 inches Not Needed A-2-4 (No. 200 Sieve ≤ 15%) 2 A-1 6 inches without Control Test Section Maximum of 12 inches

LAP1200000origind

Lift Control Test Section Requirements 1 A-3 12 inches Not Needed A-2-4 (No. 200 Sieve ≤ 15%) 2 A-1 6 inches without Control Test Section Maximum of 12 inches A-2-4 (No. 200 Sieve > 15