9274 search results for test

2340000FHWA

not requiring density testing will be prorated based on a pay factor of 1.00 for the tonnage of material in areas not requiring density testing and the actual pay factor for the tonnage of material, : 234-5.2 Acceptance Testing Exceptions: Density determinations will not be required on base, testing will be prorated based on a pay factor of 1.00 for the tonnage of material in areas not requiring density testing and the actual pay factor for the tonnage of material in areas requiring

24C-006 Audit of Contract E51A0 - Final Signed

The testing focused on the following areas: • authorization to advertise; • advertisement, of Transportation Audit Report No. 24C-006 ● Page 7 of 13 The testing focused on the following areas: • contract, Operations The testing focused on the following areas: • prosecution of work; • time extensions, to prioritize potential risks and develop targeting testing steps; • utilizing an Internal Control, under review; • examining and testing management controls of the Department’s processes to ensure

9960100-724IMPL

, and repair procedures. Independent Laboratory Test Results Product meets requirements of this Section, all required functions during and after being subjected to the environmental testing procedures, : MFES shall operate properly during and after being subjected to the environmental testing procedures, to the environmental testing procedures described in NEMA TS 2-2021, Sections 2.2.7, 2.2.8, and 2.2.9. 996-3.5, all required functions during and after being subjected to the environmental testing procedures

9960100-724FHWA

procedures. Independent Laboratory Test Results Product meets requirements of this Section, shall perform all required functions during and after being subjected to the environmental testing, Requirements: MFES shall operate properly during and after being subjected to the environmental testing, testing procedures described in NEMA TS 2 -2021, Sections 2.2.7, 2.2.8, and 2.2.9. 996-3.45 Digital, and after being subjected to the environmental testing procedures described in NEMA TS 2 -2021, Sections

9960100-724FHWA

procedures. Independent Laboratory Test Results Product meets requirements of this Section, shall perform all required functions during and after being subjected to the environmental testing, Requirements: MFES shall operate properly during and after being subjected to the environmental testing, testing procedures described in NEMA TS 2 -2021, Sections 2.2.7, 2.2.8, and 2.2.9. 996-3.45 Digital, and after being subjected to the environmental testing procedures described in NEMA TS 2 -2021, Sections

9960100-724origind

, troubleshooting guides, and repair procedures. Independent Laboratory Test Results Product meets, to the environmental testing procedures described in NEMA TS 2 -2021, Sections 2.2.7, 2.2.8, and 2.2.9. All, Requirements: MFES shall operate properly during and after being subjected to the environmental testing, being subjected to the environmental testing procedures described in NEMA TS 2 -2021, Sections 2.2.7, all required functions during and after being subjected to the environmental testing procedures

1020300.FHWA2

seeking evaluation must submitfurnish certified test reports showing that their product meets all test requirements set forth by NCHRP 350 or the MASH. Manufacturers seeking evaluation of Category I, barriers listed on the APL must have an FHWA eligibility letter and be successfully crash tested, during an off-peak period with a minimum three detections for each signal phase. Perform the test

1020300.FHWA

submitfurnish certified test reports showing that their product meets all test requirements set forth, an FHWA eligibility letter and be successfully crash tested in accordance with MASH TL-3 criteria, during an off-peak period with a minimum three detections for each signal phase. Perform the test

2026FDMPart2DesignCriteria

2023-2024 2nd Quarter SRES Report

, for geotechnical and materials testing continuing contracts, it requires FDOT to use at least three (no more than five) firms and assign testing on a rotational and equitable basis. CDL TESTING, the three parts of the commercial driver license (CDL) skills test to be completed consecutively. The exemption would allow the test to continue when the applicant fails the pre-trip inspection, Work Program & Estimates data. Based on data from current year lab volumes received for testing

1020300.impl

(MASH) and current FHWA directives. Manufacturers seeking evaluation must submit certified test reports showing that their product meets all test requirements set forth by NCHRP 350 or the MASH, eligibility letter and be successfully crash tested in accordance with MASH TL-3 criteria. All trailer, with a minimum three detections for each signal phase. Perform the test in the presence

1-13WorkbookFINAL

to 455-1 through 455-12. SP4550100DTw TP Projects with 100% Dynamic Testing of Pile Foundations WITH Test Piles. . STRUCTURES FOUNDATIONS. (REV 6-26-12) (1-13) Changes to 455-1 through 455-12. SP4550100DTw oTP Projects with 100% Dynamic Testing of Pile Foundations WITHOUT Test Piles, requested by districts PORTLAND CEMENT CONCRETE – ACCEPTANCE SAMPLING AND TESTING. (REV 6-25-10, from SS1250801 & changed name & dates. To clarify the density testing requirements when

0090800.origind

) The Contractor has furnished all required mill tests and analysis reports to the Engineer. (g

SP0090103SLLS

tests and analysis reports to the Engineer. (g) The Contractor has furnished the Construction

SP0090103SLPQ

) The Contractor has furnished all required mill tests and analysis reports to the Engineer. (g

SP0090103SLLS

tests and analysis reports to the Engineer. (g) The Contractor has furnished the Construction

0090501SLPQ.origind

mill tests and analysis reports to the Engineer. (g)TheContractorhasfurnishedthe Construction

0090801ES.origind

provisions. (f) The Contractor has furnished all required mill tests and analysis reports

SP0090103SLLS

. (f) The Contractor has furnished all required mill tests and analysis reports to the Engineer

SP0090103SLPQ

required mill tests and analysis reports to the Engineer. (g)TheContractorhasfurnishedthe Construction