9037 search results for test
6600201.origind
false positive readings, using a sample size of 200 vehicles. 660-2.5.1 Field Test Requirements: Submit a test plan for the field acceptance test (FAT) to the Engineer for approval. The test plan must, all of the following FHWA Classified Vehicles for testing: Class I, Class 2, Class 3, and Class 5. The test plan must include a proof of the design test for the complete wrong way system, positive readings required by the Engineer. All detection accuracy testing shall occur at night between
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/january-2018/review/internal/6600201.origind.pdf?sfvrsn=a83b0bc2_02000200.origind
and testing. f. Method for sampling and reporting test results. 3. The Engineer will coordinate its, , build a preliminary stockpile not to exceed 1,000 cubic yards. 5. Collect and test a minimum, . The District Materials Office will sample and test the preliminary stockpile to verify compliance with this section. 6. If all test results meet the requirements of this section, the Engineer will notify, of test data performed by the District Materials Office. 7. If the use of existing rock is approved
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2014/july-2014/review/internal/2000200.origind.pdf?sfvrsn=6756b851_0SS3340104
mixture, submit the proposed mix design with supporting test data indicating compliance with all mix, The Engineer will consider any marked variations from original test data for a mix design or any, LOTs will be evaluated based on the number of tests available, and will not be redefined. If a LOT
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2014/files/ss3340104.pdf?sfvrsn=47ebe3ce_04550513.resp
checks or re-drives of TEST PILES. Paying for all pile associated work as some arbitrary number, change to 455-5.12.1. Compensation for test pile set checks is covered in 455-11.2.9, and redrives, Anthony Walsh / Daytona Construction 386-943-5762: Section 455-11.5, Dynamic Load Tests Paragraph 1
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan09/files/4550513.resp.pdf?sfvrsn=d334a2a5_0SS7110201
by the Engineer. Conduct field tests in accordance with FM 5-541. Remove and replace traffic stripes, FM-5-541. The Department reserves the right to test the markings within three days of receipt of the Contractor’s certification. The test readings should be representative of the Contractor’s
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2011/january-2011/workbook/ss7110201.pdf?sfvrsn=4ec2b13d_0fdot-bed25-977-03-sum
Highway 301 to conduct real-world noise tests, as those roads had all three types of sinusoidal rumble, making test runs at the sites at the designated speed limit and 5 mph above it. When the test runs
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/research/reports/fdot-bed25-977-03-sum.pdf?sfvrsn=c03d8b30_33301200.FHWA
testing in accordance with FM 5-509 with one pass of the rolling straightedge operated along the outside wheel path of each lane being tested. The Engineer may require additional testing at other, along the outside wheel path of each lane being tested. The Engineer may require additional testing, with Section 102 and the Design Standards Index Nos. 607 or 619 during all testing. When traffic, for the asphalt items. 330-12.4.4 Process Control Testing: Assume full responsibility
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul06/files/3301200.fhwa.pdf?sfvrsn=880592e6_07020000.comm
with the retroreflectometer.” Testing of wet weather pavement marking systems should be tested in accordance, states” 1.2.1 Discussion—This test condition typically exists (1) after a rainfall has ended, Retroreflective performance obtained with this test in conditions of wetness does not necessarily relate, 702-4.4 Retroreflectivity Replace ASTM E2177 (Bucket Method) with ASTM E2176-01 (Standard Test Method, Testing of Traffic Marking Materials? Those procedures only reference methods for thickness
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan11/files/7020000.comm.pdf?sfvrsn=27ddc5df_07020000.comm
with the retroreflectometer.” Testing of wet weather pavement marking systems should be tested in accordance, states” 1.2.1 Discussion—This test condition typically exists (1) after a rainfall has ended, Retroreflective performance obtained with this test in conditions of wetness does not necessarily relate, 702-4.4 Retroreflectivity Replace ASTM E2177 (Bucket Method) with ASTM E2176-01 (Standard Test Method, Testing of Traffic Marking Materials? Those procedures only reference methods for thickness
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul10/files/7020000.comm.pdf?sfvrsn=a5472a76_03340802.origind
: 334-8.2.2 Two or Less Sublot Test Results: In the event that two or less sublot test results, with no plus or minus signs.) Use the 1-Test column when there is only one sublot test result and use, Sublot Test Deviation 2 Sublot Test Average Deviation Asphalt Binder Content 1.05 0.00-0.23, Quantity Pay Table Pay Factor 1 Sublot Test Deviation 2 Sublot Test Average Deviation (1). Each density test result is the average of five cores. The target density is 93.00 percent of Gmm (92.00
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul19/files/3340802-origind.pdf?sfvrsn=dcc38751_2SP7410000
, Index No. 17900. 741-2.3 Test Requirements: Perform the manufacturer’s recommended on-site pre- installation test to determine the sensor’s condition using an Inductive/Capacitance/Resistance meter. Install only those sensors that pass the pre-installation test. After installation, repeat the tests at the termination point in the cabinet. Use an oscilloscope to view and record typical, and replace any sensor that fails the test at no additional charge to the Department. 741-3 Type II
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2014/files/sp7410000.pdf?sfvrsn=504d810b_0SP7410000
in Design Standards Index 17900. 741-2.3 Test Requirements: Perform the manufacturer’s recommended on-site pre- installation test to determine the sensor’s condition using an Inductive/Capacitance/Resistance meter. Install only those sensors that pass the pre-installation test. After installation, repeat the tests at the termination point in the cabinet. Use an oscilloscope to view and record, . Remove and replace any sensor that fails the test at no additional charge to the Department. 741-3
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2012/files/sp7410000.pdf?sfvrsn=baab6e90_0SP7410000
Standards, Index No. 17900. 741-2.3 Test Requirements: Perform the manufacturer’s recommended on-site pre- installation test to determine the sensor’s condition using an Inductive/Capacitance/Resistance meter. Install only those sensors that pass the pre-installation test. After installation, repeat the tests at the termination point in the cabinet. Use an oscilloscope to view and record, . Remove and replace any sensor that fails the test at no additional charge to the Department. 741-3
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/janworkbook2014/files/sp7410000.pdf?sfvrsn=1eb402f3_0SP7410000
Standards, Index No. 17900. 741-2.3 Test Requirements: Perform the manufacturer’s recommended on-site pre- installation test to determine the sensor’s condition using an Inductive/Capacitance/Resistance meter. Install only those sensors that pass the pre-installation test. After installation, repeat the tests at the termination point in the cabinet. Use an oscilloscope to view and record, . Remove and replace any sensor that fails the test at no additional charge to the Department. 741-3
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2013/files/sp7410000.pdf?sfvrsn=c95b7829_0SP7410000
, Index No. 17900. 741-2.3 Test Requirements: Perform the manufacturer’s recommended on-site pre- installation test to determine the sensor’s condition using an Inductive/Capacitance/Resistance meter. Install only those sensors that pass the pre-installation test. After installation, repeat the tests at the termination point in the cabinet. Use an oscilloscope to view and record typical, and replace any sensor that fails the test at no additional charge to the Department. 741-3 Type II
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/janworkbook2015/files/sp7410000.pdf?sfvrsn=32727f1b_4SP7410000
Standards, Index No. 17900. 741-2.3 Test Requirements: Perform the manufacturer’s recommended on-site pre- installation test to determine the sensor’s condition using an Inductive/Capacitance/Resistance meter. Install only those sensors that pass the pre-installation test. After installation, repeat the tests at the termination point in the cabinet. Use an oscilloscope to view and record, . Remove and replace any sensor that fails the test at no additional charge to the Department. 741-3
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2013/january-2013/workbook/sp7410000.pdf?sfvrsn=8a26eb13_0Staff-Director-Agenda-Package-April-2021_0728
testimony and evidence upon which appeal is to be based. The needs of hearing or visually impaired, offices and is willing to testify at Congressional Hearings. o Chairman DeFazio will be submitting
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/mpoac_website/meetings/2021/staff-director-agenda-package-april-2021_0728.pdf?sfvrsn=fe005c78_15480206resp
made. 3. The height of the test wall shall be at least 20 feet or the highest wall on the project. Many walls are variable height over their length and the test densities should include those areas, language, density tests are required for every lift and lot placed during the construction of the wall construction with or without a test wall and subsequent construction. No change made. 4. The height of the test wall shall be at least 20 feet or the highest wall on the project. If the test wall
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul19/files/5480206resp.pdf?sfvrsn=8860fae7_2DgnStds2StdPlans.FHWA
testing may be required for the modification evaluation. Any marked variations from original test, the Resolution testing. The material will be sampled and tested in accordance with AASHTO T88, T89, by the SMO will perform Resolution testing. The material will be sampled and tested in accordance with FM, approval process. Required test reports must be conducted by an independent laboratory or other independent testing facility and required drawings and calculations must be signed and sealed
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/july-2018/review/fhwa/dgnstds2stdplans.fhwa.pdf?sfvrsn=d69c8e0b_04550513.comm
, there is no compensation for set checks or re-drives of TEST PILES. Paying for all pile associated work as some, : Section 455-11.5, Dynamic Load Tests Paragraph 1 - It seems redundant to keep the original
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan09/files/4550513.comm.pdf?sfvrsn=572e5d9d_0