9191 search results for test
SS5610000
(MSDS), or in lieu of MSDS, submit test reports showing percent weight compositional analysis, Soluble Salts Test Kit: Meet the requirements of 560-2.4. 561-2.5 Abrasives: Meet the requirements, of the existing coating are designated in the Contract Documents to be removed and replaced, clean, wash, test, to be defective. When the existing coating is to remain, clean, wash, and test and remove soluble salts, the requirements of 560-7.5 except test five random locations in the first 1000 square feet and one
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2012/files/ss5610000.pdf?sfvrsn=bde667c1_09210501.origind
Office for plan approval. In addition to the QC Plan, the supplier must submit test reports from, to these Specifications. Upon initial QC Plan approval and receipt of the cement mill test report, . An approved laboratory shall perform one quality control test per day. Submit the monthly mill test report to the State Materials Office every six months. The mill test report shall indicate, test reports shall be submitted to the Department, upon request. Producers intending to use limestone
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/july-2018/review/internal/9210501.origind.pdf?sfvrsn=bae2ebcf_03300000.D02.comm
that the Engineer deems to be objectionable in accordance with 330-12.5.1." The test method already identifies how to the testing is to be done and therefore the existing wording related to manual, be “Acceptance by Profilograph: Smoothness testing for acceptance will be performed by the laser profilograph in accordance with this section. Testing will be performed in the mainline travel lanes only and all, will be determined for each wheel path for each lane tested. The ride number will be averaged over each lot
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan09/files/3300000.d02.comm.pdf?sfvrsn=b0b9ec64_02900000.resp
/total number of tests - how does one handle a project that is built in short segments? Specifically, and longer consecutive distances before reduced testing is an option. My question to the Department is how, sections of construction are allowed in Non-Traffic construction to reduce testing requirements
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul07/files/2900000.resp.pdf?sfvrsn=e0d0f7c7_07000302.impl
to the environmental testing procedures described in NEMA TS 4-2016, Section 2. SUBARTICLE 700-5.2.12, must operate properly during and after being subjected to the environmental testing procedures, , voltage, humidity, vibration, and shock tests described in NEMA TS 4-2016, Section 2. All electronic
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2019/january-2019/review/implemented/7000302.impl.pdf?sfvrsn=15a6310f_0SS9710000
of 40 psi when tested according to ASTM D 638. A rectangular test specimen 6 by 1 by 0.05 minimum, passes testing may be placed on the QPL. When listed, this will be the minimum criteria, with the Department’s Sampling, Testing and Reporting Guide Schedule. 971-1. 6 Color: Materials, ppm lead by weight in a cured state when tested by EPA methods 3050 and 6010. Thematerial shall, . Thefollowingphysicalrequirements apply: Property Test Method Specification Gradation ASTM D 1214 AASHTO M
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2009/files/ss9710000.pdf?sfvrsn=7c5a93ec_0SS9710000
of 40 psi when tested according to ASTM D 638. A rectangular test specimen 6 by 1 by 0.05 minimum, testing may be placed on the QPL. When listed, this will be the minimum criteria for application, with the Department’s Sampling, Testing and Reporting Guide Schedule. 971-1. 6 Color: Materials, when tested in accordance with the RCRA reference above. Provide supporting independent analytical, of materials are not required to be coated. Thefollowingphysicalrequirements apply: Property Test M e t h
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2010/files/ss9710000.pdf?sfvrsn=26aca1a5_0SS9710000
tensile strength of 40 psi when tested according to ASTM D 638. A rectangular test specimen 6 by 1, % when tested in accordance with ASTM D 638. 971-8.9 Plastic Pull test: The stripes and markings, passes testing may be placed on the QPL. When listed, this will be the minimum criteria, with the Department’s Sampling, Testing and Reporting Guide Schedule. 971-1. 6 Color: Materials, lead by weight in a cured state when tested by EPA methods 3050 and 6010. Thematerial shall not exude
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2009/january-2009/workbook/ss971000025e8f832f06c49e086123c705459ebf6.pdf?sfvrsn=411c12ed_0SS9710000
tensile strength of 40 psi when tested according to ASTM D 638. A rectangular test specimen 6 by 1, % when tested in accordance with ASTM D 638. 971-8.9 Plastic Pull test: The stripes and markings, passes testing may be placed on the QPL. When listed, this will be the minimum criteria, with the Department’s Sampling, Testing and Reporting Guide Schedule. 971-1. 6 Color: Materials, lead by weight in a cured state when tested by EPA methods 3050 and 6010. Thematerial shall not exude
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2009/january-2009/workbook/ss9710000.pdf?sfvrsn=5f2866e4_0SS7820000
to design approval tests (DATs) and field acceptance tests (FATs). Develop and submit a test plan for DATs and FATs to the Engineer for review and approval. Ensure that the test plans demonstrate each, . Complete the tests within five calendar days from the initiation of the testing process, in the video display system test the testing of each color video monitor type, each secondary display, that the CCTV camera manufacturer certifies its device has successfully completed environmental testing
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2009/january-2009/workbook/ss7820000.pdf?sfvrsn=6251255b_0SS7820000
to design approval tests (DATs) and field acceptance tests (FATs). Develop and submit a test plan for DATs and FATs to the Engineer for review and approval. Ensure that the test plans demonstrate each, . Complete the tests within five calendar days from the initiation of the testing process, in the video display system test the testing of each color video monitor type, each secondary display, that the CCTV camera manufacturer certifies its device has successfully completed environmental testing
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2007/files/ss7820000.pdf?sfvrsn=5c8fd49e_0SS7820000
to design approval tests (DATs) and field acceptance tests (FATs). Develop and submit a test plan for DATs and FATs to the Engineer for review and approval. Ensure that the test plans demonstrate each, . Complete the tests within five calendar days from the initiation of the testing process, in the video display system test the testing of each color video monitor type, each secondary display, that the CCTV camera manufacturer certifies its device has successfully completed environmental testing
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2008/files/ss7820000.pdf?sfvrsn=327ad9a0_0SS7820000
a l : S u b j e c t t h e e q u i p ment covered by these specifications to design approval tests (DATs) and field acceptance tests (FATs). Develop and submit a test plan for DATs and FATs, and FATs. Compare all test results with their corresponding specifications. Complete the tests, system test the testing of each color video monitor type, each secondary display output at workstations, device has successfully completed environmental testing as defined in the environmental
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2010/january-2010/workbook/ss7820000.pdf?sfvrsn=2520a226_09710000.fhwa
to ASTM D 638. A rectangular test specimen 6 by 1 by 0.05 minimum thickness shall be tested, and the thickness of each coat at which the product passes testing may be placed on the QPL. When, , Testing and Reporting Guide Schedule. 9710000 All Jobs 971-1.7 Color: Materials for pavement, in a cured state when tested by EPA methods 3050 and 6010. Thematerial shall not exude fumes which, Thefollowingphysicalrequirements apply: Property Test M e t h o d Specification Gradation ASTMD1214
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan09/files/9710000.fhwa586ede42a2484a949a7bfd5537cb5011.pdf?sfvrsn=6f1f03fc_09710000.FHWA
to ASTM D 638. A rectangular test specimen 6 by 1 by 0.05 minimum thickness shall be tested, and the thickness of each coat at which the product passes testing may be placed on the QPL. When, , Testing and Reporting Guide Schedule. 9710000 All Jobs 971-1.7 Color: Materials for pavement, in a cured state when tested by EPA methods 3050 and 6010. Thematerial shall not exude fumes which, Thefollowingphysicalrequirements apply: Property Test M e t h o d Specification Gradation ASTMD1214
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan09/files/9710000.fhwa.pdf?sfvrsn=a7d60114_02012SITCPart1Chapter4
of , , or a . 4-25 TESTING Backfill is tested as it is being placed for moisture content, be required from select backfill and submitted to the District Laboratory for testing. You may not be responsible for actual testing, but you are responsible for seeing that tests are performed and that results are recorded. In other words, you must "follow up" on any testing that you have requested, Materials Disposal 4-17 BACKFILLING 4-19 Equipment 4-19 Materials 4-22 Testing 4-25
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/training/selfstudy/structuresparti/2012sitcpart1chapter4.pdf?sfvrsn=e225474d_09710000.origind
tensile strength of 40 psi when tested according to ASTM D 638. A rectangular test specimen 6 by 1, % when tested in accordance with ASTM D 638. 971-8.9 Plastic Pull test: The stripes and markings, of each coat at which the product passes testing may be placed on the QPL. When listed, Sampling, Testing and Reporting Guide Schedule. 971-1.7 Color: Materials for pavement markings shall, when tested by EPA methods 3050 and 6010. Thematerial shall not exude fumes which are hazardous
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan09/files/9710000.origind.pdf?sfvrsn=5102f32a_05300223.fhwa
, blasting or handling operations not exceeding 5% by weight. Drop Test***(EM 1110-2-2302) No new, million and a pH greater than 5.0. *** The Engineer will waive the Drop Test unless required to ensure structural integrity. Provide all equipment, labor and testing at no expense to the Department, % by weight. Drop Test***(EM 1110-2-2302) No new cracks developed, or no existing crack widened, will waive the Drop Test unless required to ensure structural integrity. Provide all equipment, labor
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul09/files/5300223.fhwa8542941df5184bdfa93f6e4c1015147f.pdf?sfvrsn=8e2fe0a2_05300223.FHWA
, blasting or handling operations not exceeding 5% by weight. Drop Test***(EM 1110-2-2302) No new, million and a pH greater than 5.0. *** The Engineer will waive the Drop Test unless required to ensure structural integrity. Provide all equipment, labor and testing at no expense to the Department, % by weight. Drop Test***(EM 1110-2-2302) No new cracks developed, or no existing crack widened, will waive the Drop Test unless required to ensure structural integrity. Provide all equipment, labor
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul09/files/5300223.fhwa.pdf?sfvrsn=172df275_05300201-722FHWA
, blasting or handling operations not exceeding 5% by weight. Drop Test***(EM 1110-2-2302) No new, will waive the Drop Test unless required to ensure structural integrity. Provide all equipment, labor and testing at no expense to the Department. EM refers to the US Army Corps of Engineer’s, interledge layers, blasting or handling operations not exceeding 5% by weight. Drop Test***(EM, the Drop Test unless required to ensure structural integrity. Provide all equipment, labor
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/july-2022/review/fhwa/5300201-722fhwa.pdf?sfvrsn=3605c861_2