9199 search results for test

6490403.impl

and verifying test results have been submitted to the Engineer. Determine concrete strength from tests on a minimum of two test cylinders prepared and tested in accordance with ASTM C31 and ASTM C39

3301200.impl

lane being tested. The Engineer may require additional testing at other locations within the lane, with 330-12.4.5. 330-12.4.2 T e s t M e t h o d : P e r f o r m all straightedge testing in accordance, and the Design Standards Index Nos. 607 or 619 during all testing. When traffic control cannot, items. 330-12.4.4 Process Control Testing: Assume full responsibility for controlling all paving, . Address in the QC Plan the methods to be used to control smoothness. 330-12.4.5 Quality Control Testing

D7SR56ArcherWestern13GlobalIssues

4501204.comm

from a true plane by more than 1/8 inch when both bearing areas of a unit are tested on a level plane. Provide a bearing plate or bearing area that also proves to be a true plane when tested in all

9320205.impl

pads shall withstand a minimum uniform compressive load of 1200 psi when tested in accordance, of 2,400 psi when tested in accordance with FM 5-598. 932-2.5.3 Certification: The Contractor shall

3340000SS

= individual test value (sublot) n = number of tests (sublots) s = sample standard deviation S(x 2 ) = summation of squares of individual test values (Sx) 2 = summation of individual test values squared, 0.36-0.71 Table 334-6 Small Quantity Pay Table Pay Factor 1 Sublot Test Deviation 2 Sublot Test Average, Notes: (1) Each density test result is the average of five cores. The target density for coarse, ) 334-8.2.2 Three or More Sublot Test Results: When three or more sublot test results are available

3340000SS

= individual test value (sublot) n = number of tests (sublots) s = sample standard deviation S(x 2 ) = summation of squares of individual test values (Sx) 2 = summation of individual test values squared, 0.36-0.71 Table 334-6 Small Quantity Pay Table Pay Factor 1 Sublot Test Deviation 2 Sublot Test Average, Notes: (1) Each density test result is the average of five cores. The target density for coarse, ) 334-8.2.2 Three or More Sublot Test Results: When three or more sublot test results are available

D1050000.do

for sampling, testing and inspection of materials and construction activities. Ensure that qualifications are maintained during the course of sampling, testing and inspection. Continuance, Identification Numbers (TIN) for all technicians performing sampling, testing and inspection for both field and laboratory tests. Include employed and subcontracted technicians. 105-3.2.2 Level, and testing program described in the Contract. These methods and measures shall include

D1050000

qualified personnel for sampling, testing and inspection of materials and construction activities. Ensure that qualifications are maintained during the course of sampling, testing and inspection, with their Training Identification Numbers (TIN) for all technicians performing sampling, testing and inspection for both field and laboratory tests. Include employed and subcontracted technicians, that are supplemental to the Quality Control sampling and testing program described in the Contract

D1050000.do

qualified personnel for sampling, testing and inspection of materials and construction activities. Ensure that qualifications are maintained during the course of sampling, testing and inspection, with their Training Identification Numbers (TIN) for all technicians performing sampling, testing and inspection for both field and laboratory tests. Include employed and subcontracted technicians, to the Quality Control sampling and testing program described in the Contract. These methods

9710000.FHWA

when tested according to ASTM D 638. A rectangular test specimen 6 by 1 by 0.05 minimum thickness, Federal Standard test methods with ASTM methods for both types of paint for dry opacity, bleed ratio, the product passes testing may be placed on the QPL. When listed, this will be the minimum criteria, in accordance with the Department’s Sampling, Testing and Reporting Guide Schedule. 971-1. 6 Color, for arsenic, barium, cadmium, chromium, lead, mercury, selenium or silver in a cured state when tested

9710000.fhwa

when tested according to ASTM D 638. A rectangular test specimen 6 by 1 by 0.05 minimum thickness, Federal Standard test methods with ASTM methods for both types of paint for dry opacity, bleed ratio, the product passes testing may be placed on the QPL. When listed, this will be the minimum criteria, in accordance with the Department’s Sampling, Testing and Reporting Guide Schedule. 971-1. 6 Color, for arsenic, barium, cadmium, chromium, lead, mercury, selenium or silver in a cured state when tested

26C-007 Department Section 129(a)(9) Financial Review FY 2024-25 (Over-the-Road Buses)

, 2024, to June 30, 2025. What We Found We determined the Department’s 10 toll facilities tested, $1.28 billion. 2 Due to the high volume of transactions, to perform this testing we judgmentally, facilities in Figure 1 were used for this test as their rates are fixed. The other five facilities, Tolling Transactions * Rate Schedule Tested Facility Source: OIG Prepared Schedule As part of our testing, we reviewed all 15,474 transactions to verify the billing system consistently applied

20180517SmoothnessCommitteeMeetingMinutes

and the percentage of lane miles they represent were shown. This data was the 3 year or greater test data, IRI.pptx”) Temper the statistics review with the fact that the 3-year testing is at least 3 years from, testing and testing at 3-year mark. Statistics on the delta to include maximum delta, minimum delta, a summary of the recent Smoothness Equipment Rodeo at the SMO & Williston Test Track. Initial, believe this will be the case since we have the 55 mph threshold for laser testing. (See PowerPoint

4580206.impl

test results from the manufacturer verifying the maximum coefficient of friction between mating surfaces. Testing must be performed by an independent testing laboratory according to the manufacturer’s, , manufacturer, fabrication procedure and configuration as those used in the prequalification test, life- cycle fatigue testing. Obtain all joint system components from the same manufacturer, fabricated at their approved corporate facilities, using subcomponents meeting the testing requirements

3460000.comm

with the new component material. Ensure the chloride test results from the testing lab, steven.plotkin@dot.state.fl.us Comment: (10-29-10) Looks good except that the automated slump test provision, perform a slump test and rejected a load of 8" slumped concrete. You also do not accept any future, the slump test? Suggest adding a sentence that anytime the slump is checked on the jobsite, monitoring system is not within 1 inch of the system target slump, perform a slump test. Reject

9210100.FHWA

as Na 2 O (% Na 2 O plus 0.658% K 2 O), may be used with no further testing. When tests performed, O (% Na 2 O plus 0.658% K 2 O), may be used with no further testing. When tests performed

6600201-724IMPL

: 660-4.1.2 Field Acceptance Testing: Verify presence detection accuracy at installed field sites using, system with ground truth data collected by human observation. For site acceptance tests, collect, there are a minimum of three detections for each signal phase. Perform site acceptance tests in the presence, in this Section including furnishing, placement, and testing of all materials and equipment

6600201-724origind

and the following substituted: 660-4.1.2 Field Acceptance Testing: Verify presence detection accuracy, acceptance tests, collect samples and ground truth data for each site for a minimum of five, acceptance tests in the presence of the Engineer. 6600201 SUBARTICLE 660-4.3.2 is deleted, , and testing of all materials and equipment, and for all tools, labor, equipment, hardware, operational

SS5610000

(MSDS), or in lieu of MSDS, submit test reports showing percent weight compositional analysis, Soluble Salts Test Kit: Meet the requirements of 560-2.4. 561-2.5 Abrasives: Meet the requirements, of the existing coating are designated in the Contract Documents to be removed and replaced, clean, wash, test, to be defective. When the existing coating is to remain, clean, wash, and test and remove soluble salts, the requirements of 560-7.5 except test five random locations in the first 1000 square feet and one