4272 search results for REPORT NUMBER
MPOAC-Executive-Committee-Meeting-Packet
Funds to MPOs. 3 Alison Stettner noted that the MPOAC Specific Conditions Report was due to FDOT, on it and expect to have the report completed by the end of October. In discussion between Mark, the information provided. The most accurate capture of the budget is the FLAIR report with shows all of the MPOAC funding (other than FTA funds). As shown on the FLAIR report, the MPOAC budget is solid, is created, the number of Governing Board members will increase. As of January 2022, the MPOs are: (1
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/mpoac_website/meetings/2022/mpoac-executive-committee-meeting-packet.pdf?sfvrsn=73be915d_111-Contractor Past Performance Rating CPPR 2023_NEW
Rules ➢ Standard rules of rounding apply ➢ Documentation = Daily Report of C o n s t r u c t i, 100 % ➢ No Deficiency Letter used ➢ Daily Report of C o n s t r u c t i o n tracks this. 12, Contractor pursued work on that many number or days. Make a notation in the remarks section, formance Report. 3. The pursuit of work be greater than 100%. 4. Are DLs used for Category 2 (MOT, ➢ CPA M 13 .1.9 Preparing the Report (A)(1) (B) provides link and description to C I M ➢ Current
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/training/2023-construction-academy/fall-2023/11-contractor-past-performance-rating-cppr-2023_new.pdf?sfvrsn=684f2f89_12-Contractor Past Performance Rating CPPR 2024_NEW
➢ Documentation = Daily Report of C o n s t r u c t i o n , Stop Wo r k O r d e r s , email, progress, Report of C o n s t r u c t i o n tracks this. 10 ➢ Pursuit of Wo r k cannot be greater than 100, on the five-day workweek and whether Contractor pursued work on that many number or days. Make a notation, Past Pe r f ormance Report. 3. The pursuit of work be greater than 100%. 4. Are DLs used, CPPR overdue lists. Entry Into C I M ➢ CPA M 13 .1.9 Preparing the Report (A)(1) (B) provides link
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/training/2024-fall-construction-academy/2-contractor-past-performance-rating-cppr-2024_new.pdf?sfvrsn=4fd37916_113-CPPR_Construction Academy 2025
➢ Documentation = Daily Report of C o n s t r u c t i o n , Stop Wo r k O r d e r s , email, progress, Report of C o n s t r u c t i o n tracks this. 10 ➢ Pursuit of Wo r k cannot be greater than 100, on the five-day workweek and whether Contractor pursued work on that many number or days. Make a notation, Past Pe r f ormance Report. 3. The pursuit of work be greater than 100%. 4. Are DLs used, CPPR overdue lists. Entry Into C I M ➢ CPA M 13 .1.9 Preparing the Report (A)(1) (B) provides link
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/training/2025-spring-construction-academy/13-cppr_construction-academy-2025.pdf?sfvrsn=ccf3f97d_1CPPR 2025
➢ Documentation = Daily Report of C o n s t r u c t i o n , Stop Wo r k O r d e r s , email, progress, Report of C o n s t r u c t i o n tracks this. 10 ➢ Pursuit of Wo r k cannot be greater than 100, on the five-day workweek and whether Contractor pursued work on that many number or days. Make a notation, Past Pe r f ormance Report. 3. The pursuit of work be greater than 100%. 4. Are DLs used, CPPR overdue lists. Entry Into C I M ➢ CPA M 13 .1.9 Preparing the Report (A)(1) (B) provides link
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/training/2025-fall-construction-academy/cppr-2025.pdf?sfvrsn=8c0b29d4_14550201FHWA
a minimum of four gauges per level. Ensure that the type, number, and location of the strain gauges are as shown in the Plans or as directed by the Engineer. Ensure that the type, number, and location, is deleted and the following substituted: 455-2.8 Required Reports: Include in the report of the load, the load test together with instrument calibration certifications. In addition, submit a report, will be based on the number of and type of dynamic load tests shown in the Plans, required by the Engineer
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2026-27/review/fhwa/4550201fhwa.pdf?sfvrsn=1088a38c_1D4500000.do
property test report and the manufacturer’s assigned LOT number(s) with the heat of the material represented. Verify that the report represents the steel received and that the steel meets, . Ensure that the calibration report includes, the serial number of the equipment that is calibrated, report detailing the results of the daily QCP activities. Ensure these daily reports and minutes, the identification of the bed, type of fabricated products, jack identification number, date prestressing strands
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2003/january-2003/workbook/d4500000.dob820a9b4cc18416a803f4c7d9d43bfbb.pdf?sfvrsn=6004755e_0D4500000.do
property test report and the manufacturer’s assigned LOT number(s) with the heat of the material represented. Verify that the report represents the steel received and that the steel meets, . Ensure that the calibration report includes, the serial number of the equipment that is calibrated, report detailing the results of the daily QCP activities. Ensure these daily reports and minutes, the identification of the bed, type of fabricated products, jack identification number, date prestressing strands
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2003/january-2003/workbook/d4500000.do.pdf?sfvrsn=c9a6feab_0FMPP May 2025 Meeting Notes_05072025
Signal one could show which types of micromobility were in crashes Signal4 needs to better report, fatality/injury numbers on HIN roadways School zone speed cameras Best Foot Forward - a Ped Crossing
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/planning/policy/metrosupport/fmpp/2025-2-may/fmpp-may-2025-meeting-notes_05072025.pdf?sfvrsn=7bd8bc2b_14550000.FHWA
. 4550000.D02 All Jobs Obtain the Engineer’s approval of the number and location of monitoring, report before beginning foundation construction operations and a second report after completing, . Furnish the Engineer a written report by the divers indicating the results of their underwater, of the load. Ensure that the type, number, and location of the strain gauges are as shown, . 455-2.8 Required Reports: Submit a preliminary static load test report to the Engineer within five days
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2014/july-2014/review/fhwa/4550000.fhwa.pdf?sfvrsn=c2345537_0fdot-bdv25-977-67-rpt
FINAL REPORT Principal Investigator: Gray Mullins, Ph.D., P.E. with Graduate Researchers Malaak, with Section 4 of ASTM E380. vi Technical Report Documentation Page 1. Report No. 2. Government Accession, . Report Date March 2023 6. Performing Organization Code 7. Author(s) G. Mullins, M. Araujo, T. Mee, A. Lewis and R. Pendyala 8. Performing Organization Report No. 9. Performing Organization Name, Suwannee Street, MS 30 Tallahassee, FL 32399 13. Type of Report and Period Covered Final Report
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/research/reports/fdot-bdv25-977-67-rpt.pdf?sfvrsn=80c5a08f_1Disposal of Surplus Property_10.5
requires a separate agent to perform negotiations and estimates of value. Appraisal: The report, (USPAP) and found to be a report that can be used to make a prudent business decision. This can, in the county of record, and provide a copy of the recorded deed, showing the book and page number and date, prepare all necessary closing documents. 10.5.5.9 Public Purpose Conveyance Report: Each district shall compile and submit to the State Property Management Administrator an annual report of property
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/rightofway/documents/rowmanual/disposal-of-surplus-property_10-5.pdf?sfvrsn=df71e914_17000000.impl
of the manufacturer, the part number, and the date of manufacturer. Marking must be accomplished by permanently, pieces, are continuously welded using an inert gas welding method. Limit the number of seams, that the sign blanks when a critical temperature is exceeded and that the sign will report, Bits 7or8bits Parity Even,Odd,orNone Number Stop Bits 1or2bit
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2014/january-2014/review/implemented/7000000.impl.pdf?sfvrsn=721124fb_0fdot-bed65-rpt
Final Report December 2024 Principal Investigator: Armin Mehrabi Co-PI: T odd Helwig Co-PI: K, Khedmatgozar Dolati Sponsored by A report from ii DISCLAIMER This research is funded by the Florida, . iii Technical Report Documentation Page 1. Report No. : FIU-BED65-06 2. Government Accession No. 3. R ecipient’s Catalog No. 4. Title and Subtitle 5. Report Date Half-Round Bearing Stiffeners, Organization Report No. Armin Mehrabi https://orcid.org/0000-0003-4736-850X Dariya Tabiatnejad https
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/structures/structuresresearchcenter/final-reports/2025/fdot-bed65-rpt.pdf?sfvrsn=635fd43a_1drainagemanual2024withRevisions
for temporary drainage. Section 3.13.2 – Moved pipe inspection and siltation report to top of the list, will provide a Drainage Design Report to accompany all phase submittals (signed and sealed for the Final, submittals must include hydrologic and hydraulic models. The Drainage Design Report must include, to the Drainage Design Report. Topic No. 625-040-002 Effective: January 2024 Drainage Manual 1-4 1.7, : _________________________________ Prepared by: ____________ Date: ____________ Project Number
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/roadway/drainage/files/drainagemanual2024withrevisions.pdf?sfvrsn=90938a97_14550000DB.origind
a written report by the divers to the Engineer indicating the results of their underwater inspection, that the type, number, and location of the strain gauges are as shown in the Plans or as directed, of the test. 455-2.8 Required Reports: Submit a static load test report signed and sealed, . Include in the report of the load test the following information: 1. A tabulation of the time, . In addition, submit a report showing an analysis of the results of axial load and lateral load tests
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/january-2018/review/internal/4550000db.origind.pdf?sfvrsn=38c24abf_0SS4550000
. ObtaintheEngineer’s approval of the number and location of monitoring points. Take elevation; (1) b e f o r e b e, report before beginning foundation construction operations and a second report after completing, construction operations. Furnish the Engineer a written report by the divers indicating the results, that the type, number, and location of the strain gauges are as shown in the plans or as directed, a preliminary static load test report to the Engineer within five days after completing the load test
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2009/january-2009/workbook/ss4550000.pdf?sfvrsn=10d6d9d5_0SS4550000
. ObtaintheEngineer’s approval of the number and location of monitoring points. Take elevation; (1) b e f o r e b e, report before beginning foundation construction operations and a second report after completing, construction operations. Furnish the Engineer a written report by the divers indicating the results, that the type, number, and location of the strain gauges are as shown in the plans or as directed, a preliminary static load test report to the Engineer within five days after completing the load test
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2009/january-2009/workbook/ss4550000bf728f67f4b445b39276cfff3b24b226.pdf?sfvrsn=e8da5d9c_0OOM_20241113_RA-Handbook
scoring an inspection form manually, take the total number of passing characteristics and divide it by the total number of characteristics rated (less the blank entries) and multiply by the factor, . Sinks Maintenance Criteria: 100% free of graffiti 90% of the total number of sinks, faucets, or trim to meet the above criteria. Count the total number of sinks being inspected and divide by the number of sinks that did not meet criteria. RESTROOMS - SINKS 14 This faucet is leaking
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/maintenance/cont/ra/oom_20241113_ra-handbook.pdf?sfvrsn=1c2b20df_1DEV346-455-MM92ACP (4-25-23)
ACP Grout Class I Report Report 29 (2) or 40 (3) ACP Grout Class II Report Report 29 (2, added at the jobsite. 4.Additional mixing revolutions when water is added. 5.Total number, randomly as determined by a random number generator acceptable to the Department. The Department, design based on a random number generator. The Department may perform Independent Verification (IV, (ln t) 2 � 100 Where: t is the elapsed number of days from grout placement to the resolution
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/special-case/developmental/dev346-455-mm92acp-(4-25-23).pdf?sfvrsn=148bdbc6_4