9191 search results for test
drbsig1
the data provided and all the testimony the Board has determined that there is no entitlement due
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/constadm/drb/decision/d1/drbsig1.pdf?sfvrsn=72c72beb_0T3043_FPN220442-5_SR10_RelocateGasMain
documents to the Board prior to the hearing. Both parties gave testimony to clarify written documents
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/constadm/drb/decision/d3/0708/t3043_fpn220442-5_sr10_relocategasmain.pdf?sfvrsn=cb90989e_2E3E19_417474-2_ I-10BridgeReplace_GrindingGroovingSpec5-12NewInfo
documents to the Board prior to the hearing. Both parties gave testimony to clarify written documents
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/constadm/drb/decision/d3/0708/e3e19_417474-2_-i-10bridgereplace_grindinggroovingspec5-12newinfo.pdf?sfvrsn=25aa4c28_29710800IMP
kPa] when tested according to ASTM D 638. A rectangular test specimen 6 by 1 by 0.05 [150 by 25 by 1.5 mm] minimum thickness shall be tested at a temperature range of 40 to 80ºF [21 to 27ºC] using, a minimum elongation of 25% when tested in accordance with ASTM D 638. 971-8.9 Plastic Pull test, Pendulum Number) when tested according to ASTM E 303. Bike lane symbols and pedestrian crosswalks, at a temperature range of 70 to 80ºF [21 to 27ºC]. Rectangular test specimen size shall be 6 by 1
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul06/files/9710800imp.pdf?sfvrsn=9022e64f_07010200.impl
of the materials in accordance with the Department’s Sampling, Testing and Reporting Guide schedule. 701-2.2, and the Department’s Sampling, Testing and Reporting Guide schedule
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul09/files/7010200.impl.pdf?sfvrsn=50415d8d_04600604-724CommResp
4600604 STRUCTURAL STEEL AND MISCELLANEOUS METALS COMMENTS FROM INTERNAL/INDUSTRY REVIEW Keith Krieger Wo rk Phone: 561-389-1075 E-Mail: keith.krieger@dot.state.fl.us Comments: (6-16-23 Industry) The section now reads: Unless otherwise shown in the Plans, perform ultrasonic testing (UT) or radiographic testing (RT) on all complete joint penetration welds at the following frequency....this is confusing....first it says "all"....then it says "at the following frequency"....it can't
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2024-25/review/comments-responses/4600604-724commresp.pdf?sfvrsn=79b9201_21040400-722.D0C1impl
PREVENTION, CONTROL, AND ABATEMENT OF EROSION AND WATER POLLUTION (REV 12-8-21) (FA 1-4-22) (7-22) ARTICLE 104-4 is deleted and the following substituted: 104-4 Materials for Temporary Erosion Control. For materials that are part of the permanent work, meet the testing requirements of the applicable permanent materials. For materials not part of the permanent work, no testing is required; acceptance will be based on visual inspection Use new or used materials for the construction
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/july-2022/review/implemented/1040400-722-d0c1impl.pdf?sfvrsn=15e26eb1_25480906.resp
) Suggest removing the pH from the table and write in the specification that acceptance pH testing, will be added to the table clarifying that the sample for pH verification testing will be taken
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2015/january-2015/review/comments-responses/5480906.resp.pdf?sfvrsn=164fa0e0_09920000.FHWA
0.5 mA. 3.Flame Retardant Test: Flammability tests shall be conducted on the cable, the molded, current shall not exceed 0.5 mA. 3.Flame Retardant Test: Flammability tests shall be conducted, tested by applying a test current of 1,000 amperes, 60 HZ for a minimum of 3 cycles (50 ms, locations by an OSHA recognized “Nationally Recognized Testing Laboratory” (NRTL), minimummaximum, be color-coded stranded copper meeting the requirements of NEMA WC 70. All conductors shall be tested
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2016/july-2016/review/fhwa/9920000.fhwa.pdf?sfvrsn=bbcac711_05600000FHWA
soluble Salt Test kits that meet the following requirements: contains all materials, supplies, tools and instructions for field testing and on-site quantitative evaluation; the extract solution, materials and solutions for each test. Ensurethetestcontainer (vessel, sleeve, cell. etc.) creates, for testing the following steel surfaces: horizontal (up/down configuration), vertical, flat, curved, the chloride, sulfate and nitrate concentrations on all structure surfaces, using soluble salts test kits
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan06/files/5600000fhwa.pdf?sfvrsn=ca6700c7_05600000IMP
are approved by the coating manufacturer. Use soluble Salt Test kits that meet the following requirements: contains all materials, supplies, tools and instructions for field testing and on-site quantitative, sealed titration device and contains new materials and solutions for each test, . Ensurethetestcontainer is suitable for testing the following steel surfaces: horizontal (up/down, salts test kits meeting the requirements of 560-2.4, laboratory test methods or other method approved
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan06/files/5600000imp.pdf?sfvrsn=abf03ea8_05600000SS
Test kits that meet the following requirements: contains all materials, supplies, tools and instructions for field testing and on-site quantitative evaluation; the extract solution is factory pre, and solutions for each test. Ensurethetestcontainer (vessel, sleeve, cell. etc.) creates a sealed, encapsulated environment during ion extraction. Ensurethetestcontainer is suitable for testing, concentrations on all structure surfaces, using soluble salts test kits meeting the requirements
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2006/january-2006/workbook/5600000ssa4df5043c39047a5a2a5426ff9c77802.pdf?sfvrsn=f4e8be9b_09940000.D02.impl
). Manufacturers seeking evaluation of their products shall submit product data sheets, performance test, t i n g , p r o c e s s i n k s a n d f i l m overlay materials shall be tested in accordance, (Special) shall be tested in accordance with, and meet the performance requirements of ASTM D-4956 Type, , each color included in the QPL application must be tested and meet the requirements identified in ASTM, to reflective sheeting in accordance with Section 994-4 for testing. 994-3.2RetroreflectiveIntensity
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul10/files/9940000.d02.impl.pdf?sfvrsn=6c6e98a6_0SS9940000
of their products shall submit product data sheets, performance test reports from an independent laboratory, shall be tested in accordance with, and meet all the performance requirements of ASTM D-4956, in this Section. Classification Type VII (Special) shall be tested in accordance with, and meet the performance, requirements that are color dependant, each color included in the QPL application must be tested and meet, overlay materials shall be applied to reflective sheeting in accordance with Section 994-4 for testing
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2011/files/ss9940000.pdf?sfvrsn=c0632602_0SS9940000
of their products shall submit product data sheets, performance test reports from an independent laboratory, materials shall be tested in accordance with, and meet all the performance requirements of ASTM, in this Section. Classification Type VII (Special) shall be tested in accordance with, and meet, . For performance requirements that are color dependant, each color included in the QPL application must be tested, for testing. 994-3.2 Retroreflective Intensity: The retroreflective sheeting shall meet the minimum
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2012/files/ss9940000.pdf?sfvrsn=234a7a83_0SS9940000
of their products shall submit product data sheets, performance test reports from an independent laboratory, shall be tested in accordance with, and meet all the performance requirements of ASTM D-4956, in this Section. Classification Type VII (Special) shall be tested in accordance with, and meet the performance, requirements that are color dependant, each color included in the QPL application must be tested and meet, overlay materials shall be applied to reflective sheeting in accordance with Section 994-4 for testing
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2011/january-2011/workbook/ss9940000.pdf?sfvrsn=9efcb76b_0SS9940000
of their products shall submit product data sheets, performance test reports from an independent laboratory, shall be tested in accordance with, and meet all the performance requirements of ASTM D-4956, in this Section. Classification Type VII (Special) shall be tested in accordance with, and meet the performance, requirements that are color dependant, each color included in the QPL application must be tested and meet, overlay materials shall be applied to reflective sheeting in accordance with Section 994-4 for testing
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2012/january-2012/workbook/ss9940000.pdf?sfvrsn=1c8b2790_04620000origind
until grout test results are available and approved by the Engineer. Mock-up testing per section, device volume for the 0.5 gallon test device. When testing the 6.5 gallon device, ensure an accuracy of 3% (test device volume) and 6% (grout volume). 3. Do not use grout that tests outside allowable, feet or less, perform a fluidity test on a per batch basis. For fluidity tests done on a per batch, are met. Discard grout used for testing fluidity. 3. Perform fluidity test for each tendon
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul19/files/4620000origind.pdf?sfvrsn=e70f5e2e_24620000.origind
until grout test results are available and approved by the Engineer. Mock-up testing per section, device volume for the 0.5 gallon test device. When testing the 6.5 gallon device, ensure an accuracy of 3% (test device volume) and 6% (grout volume). 3. Do not use grout that tests outside allowable, feet or less, perform a fluidity test on a per batch basis. For fluidity tests done on a per batch, are met. Discard grout used for testing fluidity. 3. Perform fluidity test for each tendon
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul19/files/4620000-origind.pdf?sfvrsn=a124eff7_2GL-All-FY1415
Proctor tests with a minimum frequency of one test per soil type [Spec. 125-9] 26. If Density tests, equipment used on this project? 120-10.1.1 9. Is the CEI ensuring that all sampling and testing requirements are met and enforcing the requirement that all samples and test are taken randomly? Does the field test verify this? [Spec 120-10] 10. Does the CEI have an appropriate process to ensure that the correct proctor is used when density tests results are evaluated for material acceptance
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/construction/constadm/guidelist/inspectguidelist/fy1415/gl-all-fy1415.pdf?sfvrsn=f366f8e5_0