3594 search results for REPORT NUMBER
Staff-Minutes-4_29_21-FINAL
by a phone number. • CALL TO ORDER Don Scott, Chair, Lee County MPO, called the meeting to order, comments were made. • EXECUTIVE DIRECTOR’S REPORT A. UPWP REPORT Mr. Jeff Kramer, Interim MPOAC, Work Program (UPWP) Report showing expenditures and budget for the third quarter of state fiscal year, % of a project. The 9 Department will complete a study on this proposed change and report on the findings. It, to the Governing Board on a number of issues including what should be included in the position
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/mpoac_website/meetings/2021/staff-minutes-4_29_21-final.pdf?sfvrsn=509c9a21_1Road Ranger Responder Survey_2010
is included in Appendix A of this report. Statewide Road Ranger Survey for Incident Responders 4, will be used in several quarterly and annual reports throughout the year. T h i s report contains, on the total number of responses received. This measurement approach gauges the degree of responses, of the counties and the number of responses. Counties and Number of Responses Broward 98 Indian River 11, , or strongly disagree. Although the total number of negative responses was relatively low, a review
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/traffic/cvotim/tim/archive/road-ranger-responder-survey_2010.pdf?sfvrsn=91960033_1Road Ranger Responder Survey_2010
is included in Appendix A of this report. Statewide Road Ranger Survey for Incident Responders 4, will be used in several quarterly and annual reports throughout the year. T h i s report contains, on the total number of responses received. This measurement approach gauges the degree of responses, of the counties and the number of responses. Counties and Number of Responses Broward 98 Indian River 11, , or strongly disagree. Although the total number of negative responses was relatively low, a review
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/traffic/cvotim/tim/archive/rr-library/road-ranger-responder-survey_2010.pdf?sfvrsn=86759a8c_19970000-122FHWA
with manufacturer name or trademark, part number, and date of manufacture or serial number. Product Sample, Protocol (PPP) Event Reporting: The device shall have the capability to record and report, or trademark, part number, and date of manufacture or serial number. Product Sample When requested, submit, Reporting: The device shall have the capability to record and report, at a minimum, the following
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2022/january-2022/review/fhwa/9970000-122fhwa.pdf?sfvrsn=a9c7f706_244893815201-DrainageTechMemo
Number: 448938-1-52-01 Hendry County Prepared For: Florida Department of Transportation District 1, 27) from Stitt Ranch Road to Flaghole Road FPID NO.: 448938-1-52-01 REPORT: Drainage Design, limits which are permitted through South Florida Water Management District (SFWMD), ERP number 26-01170-P. Based on ERP number 26- 01170-P, the project limits have two retention ponds in the median, . LICENSE NUMBER: 82300 COREY M. BLOXAM, P.E. T H E O F F I C I A L R E C O R D O F
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/procuement_marketingd1/documents/fy24-25/ad--25131/44893815201-drainagetechmemo.pdf?sfvrsn=a9ba6939_1Glades_SR29_DrainageComplaintRevised
. The purpose of this report is to document the causes for the flooding problems along S.R. 29 as reported, of debris as well. No damage was observed at the drainage structures. A scour report was obtained for bridge number 050033 (Cypress Branch Bridge). Cypress Branch is a riverine waterway that flows, no scour reports available for the Lone Pine Creek Bridge number 050035. A field meeting was held, here as well. The report suggests double 72” pipes be installed to address the flooding. Currently
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/procuement_marketingd1/documents/fy24-25/ad--25114/glades_sr29_drainagecomplaintrevised.pdf?sfvrsn=555520c3_19710104-724FHWA
, date of manufacturer, lot number and APL number. The label shall warn the user of any special handling, listed in Table 1 of 40 CFR 261.24. AASHTO Product Evaluation & Audit Solutions Field Test Report, Specification requirements. Independent Laboratory Test Report Submit independent laboratory test results, data meeting FDOT Specification requirements. A notation of the number of coats and the thickness, on the label. The label must also show the color, date of manufacturer, lot number and APL number
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2024-25/review/fhwa/9710104-724fhwa.pdf?sfvrsn=325bcae7_1SP4550000DB.origind
authorizing the Contractor to proceed with subsequent construction operations. Submit a written report, to measure the distribution of the load. Ensure that the type, number, and location of the strain, : Submit a static load test report signed and sealed by the Specialty Engineer to the Engineer, , prior to beginning production pile/shaft construction. Include in the report of the load test, together with instrument calibration certifications. In addition, submit a report showing
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2019/january-2019/review/internal/sp4550000db.origind.pdf?sfvrsn=f245f306_0Chapter_13
) Report to their supervisor no later than the next workday following the suspension or revocation, with occupational exposure, which will include the following: (1) Name and Social Security number of the employee
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/safety/industrialsafety/chapter_13.pdf?sfvrsn=13f567bc_1SP0090103LS
Averages report. The dates will be the six months prior to the letting date for this Contract, l l p r o v i d e a c o mputer application that will calculate and print the number of gallons, : 1.ContractNumber, Financial Project Identification Number, Estimate Number, Monthly Estimate Date and the period
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2018/july-2018/workbook/sp0090103ls.pdf?sfvrsn=4b7c7253_0CPAM 5 16 Redline_Online Review 8-22-24
at the same target an equal number of times in the Face 2 (reverse) telescope orientation and recording, Earthwork Notes and Documentation 5.16-18 (b) For each output report generated, describe the purpose of the report and the information needed to re-generate the report. (c) For each output file, submitted must be identified with the Financial Project Identification Number(s), State Roadway Number(s), Consultant Identification (names, addresses, etc.), and Contract number. (10) No project
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/manuals/cpam/newhistory/cpam-5-16-redline_online-review-8-22-24.pdf?sfvrsn=d8943e20_12025_Construction Academy_Structural Materials_03-25-2025
the end of the project to submit samples. • Heat Number • Bar Size • Grade • Specification, is needed. • The Commercial Inspection Report is retained in the construct file. When, Inspection Report • Project Information • Fabricator • Materials • Description • Inspection, • Certified Mill Test Reports Commerc ial Inspection Report • Steel Posts. • Steel Off set, mill stamp on panels. • Randomly select 1 Stamp Number per 1000 feet of installed guardrail, up
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/training/2025-spring-construction-academy/2025_construction-academy_structural-materials_03-25-2025.pdf?sfvrsn=b541517e_1Chapter5s16
. Then, transiting or “flipping” the telescope and pointing at the same target an equal number of times, report generated, describe the purpose of the report and the information needed to re-generate the report. (c) For each output file, describe the purpose of the file and the information needed to re, Identification Number(s), State Roadway Number(s), Consultant Identification (names, addresses, etc.), and Contract number. (10) No project will be considered acceptable or complete until all deliverables
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/manuals/cpam/newcleanchapters/chapter5s16.pdf?sfvrsn=980d67d8_11Chapter5s16Redline
” the telescope and pointing at the same target an equal number of times in the Face 2 (reverse) telescope, ) For each output report generated, describe the purpose of the report and the information needed to re-generate the report. (c) For each output file, describe the purpose of the file and the information, Identification Number(s), State Roadway Number(s), Consultant Identification (names, addresses, etc.), and Contract number. (10) No project will be considered acceptable or complete until all
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/manuals/cpam/newhistory/chapter5s16redline.pdf?sfvrsn=27dbe498_6CTQM Ch 4
of the technician seeking qualification to report ACI certifications through the Technician’s Online Portal’s Report a Requirement on the CTQP website. This reporting will include the ACI certification number, /equipment and reporting of data using standard report forms. This instruction includes the use of random number tables. Course Prerequisites Check the ACI website for current ACI Course prerequisites
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/manuals/ctqm/new_files/ctqm-ch-4.docx?sfvrsn=793d517d_5CTQM Ch 4 -clean
of the technician seeking qualification to report ACI certifications through the Technician’s Online Portal’s Report a Requirement on the CTQP website. This reporting will include the ACI certification number, /equipment and reporting of data using standard report forms. This instruction includes the use of random number tables. Course Prerequisites Check the ACI website for current ACI Course prerequisites
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/construction/manuals/ctqm/new_files/ctqm-ch-4--clean.docx?sfvrsn=ff31ae56_3Final-Gov-Bd-Mtg-Minutes-7_30_2019
. PUBLIC COMMENTS No public comments were made. 3 EXECUTIVE DIRECTOR’S REPORT AGENCY REPORTS A. UPWP REPORT Mr. Carl Mikyska, MPOAC Executive Director, presented the UPWP Report showing, position number 2 to the end (after number 7). Commissioner Robert Bender, Florida-Alabama TPO
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/mpoac_website/meetings/2019/final-gov-bd-mtg-minutes-7_30_2019.pdf?sfvrsn=2796b72d_1SS4620000
with the suppliers name, trademark model number and size corresponding to catalog designation. Post-tensioning, Federation of Structural Concrete (FIB) Technical Report, Bulletin 7, titled “Corrugated Plastic Duct for Internal Bonded Post-Tensioning” as modified herein. Therequirements in FIB Technical Report, wear test as described in Chapter 4, Article 4.1.7 of FIB Technical Report, Bulletin 7, titled, to the wear test apparatus with the same clamping force as a function of the number of strands
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2007/january-2007/workbook/ss4620000185b11357f00416db7e168cc1abe7b4c.pdf?sfvrsn=7899efc6_0SS4620000
with the suppliers name, trademark model number and size corresponding to catalog designation. Post-tensioning, Federation of Structural Concrete (FIB) Technical Report, Bulletin 7, titled “Corrugated Plastic Duct for Internal Bonded Post-Tensioning” as modified herein. Therequirements in FIB Technical Report, wear test as described in Chapter 4, Article 4.1.7 of FIB Technical Report, Bulletin 7, titled, to the wear test apparatus with the same clamping force as a function of the number of strands
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2007/january-2007/workbook/ss4620000.pdf?sfvrsn=c78cdfd2_0SS4620000
with the suppliers name, trademark model number and size corresponding to catalog designation. Post-tensioning, Federation of Structural Concrete (FIB) Technical Report, Bulletin 7, titled “Corrugated Plastic Duct for Internal Bonded Post-Tensioning” as modified herein. Therequirements in FIB Technical Report, wear test as described in Chapter 4, Article 4.1.7 of FIB Technical Report, Bulletin 7, titled, to the wear test apparatus with the same clamping force as a function of the number of strands
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2008/january-2008/workbook/ss4620000.pdf?sfvrsn=a2a25521_0