9191 search results for test
9320103.FHWA
) is deleted and the following substituted: 932-1.3.2 Physical Requirements: SILICONE SEALANT TYPE Test, and Ultraviolet ASTM C-793 No chalking, cracking or 9320103D01 All Jobs SILICONE SEALANT TYPE Test Method, and bonded together with a thin section of sealant. After cure of sealant, briquets shall be tested, product, a primer shall be used. The manufacturer shall perform quality control tests on each LOT, , colored to match the finish surface coating of the concrete, and meet the following minimum testing
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan11/files/9320103.fhwa.pdf?sfvrsn=1c2bee89_06110400.resp
6110400 ACCEPTANCE PROCEDURES FOR TRAFFIC SIGNALS AND DEVICES COMMENTS FROM INTERNAL/INDUSTRY REVIEW Pat McCann (954) 777-4387 pat.mccann@dot.state.fl.us Comments: (6-16-11) D4 Contruction has the following comments: Revise the proposed text to "Start the 48 hour test on a Monday Tuesday, test does not include a weekend, holiday or special event the contractor will be prevented from starting the 48 hour test on a holiday, day preceding a holiday or special event. No change made. ******************************************************************************
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan12/files/6110400.resp.pdf?sfvrsn=dc1eaa_09490000.origind
these materials have been sampled by project personnel and tested by the State Materials Office. The current acceptance method of sampling and testing is being revised to acceptance by manufacturer’s, be a minimal decrease in project costs as this change reduces amount of sampling and testing, acceptable to the Department, such units may be accepted on the basis of six test certificates
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul13/files/9490000.origind.pdf?sfvrsn=709c23d_09710700.impl
tested according to ASTM D638. A rectangular test specimen 6 inches by 1 inch by 0.05 inches minimum thickness shall be tested at a temperature range of 40 to 80ºF using a jaw speed of 0.25 inch/min. 971-7.8 Elongation: The stripes and markings shall have a minimum elongation of 25% when tested in accordance with ASTM D 638. 971-7.9 Plastic Pull test: The stripes and markings shall support, a minimum skid resistance value of 35 BPN when tested according to ASTM E303. Bike lane symbols
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2014/january-2014/review/implemented/9710700.impl.pdf?sfvrsn=f6dd0241_0fdot-bec98-sum
the physical and chemical properties of these materials and performed several tests, including compressive strength tests, resistivity tests, and sulfate durability assessments. The study included, insights into long-term durability. Mortar bars and concrete samples were tested under different
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/research/reports/fdot-bec98-sum.pdf?sfvrsn=99604ae0_29850202.origind
shall be tested by an independent third party in accordance with the following methods as they apply to the specific application type. All testing and reported values, except apparent opening size (AOS, AASHTO T88. Table 1.1 Drainage Geotextiles Test Methods and Requirements for Types D-1, D-2 and D-3 Property/Test Method D-1 D-2 D-3 Minimum Permittivity (Sec - 1) per ASTM D4491 D-1a = 0.7, Unit Area (oz/sy) per ASTM D5261 Provide Test Result Provide Test Result Provide Test Result
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2019/january-2019/review/internal/9850202.origind.pdf?sfvrsn=cdec97ec_05600204.origind
theuseofanelectronicconductivitymeter for soluble salts testing and to clarify application intent for caulking and stripe coating, : Use a soluble salts test kit in accordance with SSPC- Guide 15 utilizing a Class A retrieval method. Ensure the test sleeve or cell creates a sealed, encapsulated environment during ion extraction and is suitable for testing all structural steel surfaces. As an alternatively, contaminant and oil content tests outlined in SSPC-AB 2 at least one time each week or more frequently
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul13/files/5600204.origind.pdf?sfvrsn=7ae0ddb1_0SS6300301
. Ensure that wire termination occurs only at the top of a pull box. Perform continuity tests and insulation resistance tests on all locate wires. Provide the Engineer with all test results. Replace
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/julworkbook2012/files/ss6300301.pdf?sfvrsn=28fb3b95_06300301.impl
at the top of a pull box. Perform continuity tests and insulation resistance tests on all locate wires. Provide the Engineer with all test results. Replace or repair defective locate wire
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul11/files/6300301.impl.pdf?sfvrsn=ff30e978_0SS6300301
. Ensure that wire termination occurs only at the top of a pull box. Perform continuity tests and insulation resistance tests on all locate wires. Provide the Engineer with all test results. Replace
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/2012/january-2012/workbook/ss6300301.pdf?sfvrsn=53776a83_04600000.d02Origin
, fabricate, assemble, erect, and perform all nondestructive testing for structural steel or miscellaneous, .................Section962 Material Testing and Certifications ....................Section 962 Galvanizing, and workmanship, clearly addressing the methods used, frequency of inspections or tests, and personnel, ; g.Installationofhighstrengthboltsandrotationalcapacity(RC) tests; and DTI Verification tests h. F i e l d w e l d i n g ; i, . 6.Sampling and Testing Procedures 7.Projectspecific areas of concern for fabrication, inspection
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan07/files/4600000.d02origin.pdf?sfvrsn=a63f0c08_05600705.FHWA
the tests after washing and after each applied coat of the coating system. Test three random locations, test kits meeting the requirements of 560-2.4. Measure the concentration levels using the method described in SSPC-TU 4. Perform the tests after washing and after each applied coat of the coating system. Test three random locations in the first 1000 square feet and one random location for each, and nitrate concentrations on all steel surfaces using soluble salts test kits meeting the requirements
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul12/files/5600705.fhwa.pdf?sfvrsn=7dfe138_0CM-700-01 Sign Beacon
party test report that demonstrates compliance with this requirement. A completed Testing, . FORMDROPDOWN FORMTEXT Applicant may provide comments in this field. Physical Inspection TERL Test Cases, in submittal. TERL Test Cases (Steps): SB001 (Step 1), SB003 (Step 4) FORMTEXT FORMTEXT, Inspection FORMTEXT Indicate location of requested information in submittal. TERL Test Cases (Steps, of requested information in submittal. TERL Test Cases (Steps): SB001 (Step 3), SB002 (Step 2
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/traffic/traf_sys/compliance-matrices-2022/cm-700-01-sign-beacon.docx?sfvrsn=cc7a00a8_13460301.origind
tested in accordance with FM 5- 578. Submit three 4 x 8 inch cylindrical test specimens to the Engineer for resistivity testing before mix design approval. Take the resistivity test specimens from, for the required plastic and hardened property tests. Cure the field trial batch specimens similar to the standard laboratory curing methods. Submit the resistivity test specimens at least 7 days prior to the scheduled 28 day test. The average resistivity of the three cylinders, eight readings per
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan12/files/3460301.origind.pdf?sfvrsn=37d332f1_0redline-ebook-compressed
American Society for Testing and Materials AWG American Wire Gauge AWPA American Wood Preservers, , test method, or other code or recommendation of the particular authority or organization shown. Use standards, specifications, test methods, or other codes as specified in the current edition, t D o c u m e n t Laboratory. The official testing laboratory used by the Department, to the tests provided for in these Specifications to determine the materials’ quality and fitness for the work
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/ebook/redline-ebook-compressed.pdf?sfvrsn=84f3c49f_15600000.resp
this section salt tests are required after washing & between each coat. Please consider, for new zinc primed steel, that after the initial tests are performed prior to the first coat subsequent tests, at the states discretion. This will reduce the cost of testing. Keep in mind that testing requires not only the personnel and countless tests kits but the equipment to access the area and all the MOT & safety, three tests on new steel with zinc primer if the tests are shown to be within the allowed threshold
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jan10/files/5600000.resp.pdf?sfvrsn=b5376e8d_07151300.origind
flat on the ground with 1 inch projecting above finished grade. 715-143 Tests of Installation. Upon completion of the work, test the installation to ensure that the installation is entirely free, . Furnish all labor, materials, and apparatus necessary for making the required tests. Remove and replace any defective material or workmanship discovered as a result of these tests at no expense to the Department, and make subsequent re-tests to the satisfaction of the Engineer. Make all
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul19/files/7151300-origind.pdf?sfvrsn=cc169e13_22025-26 eBook-compressed
for Testing and Materials AWG American Wire Gauge AWPA American Wood Preservers Association AWS, of numbers and letters, designates a specification, test method, or other code or recommendation of the particular authority or organization shown. Use standards, specifications, test methods, or other, . 5 FY 2025-26 Laboratory. The official testing laboratory used by the Department. Major Item
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/ebook/2025-26-ebook-compressed.pdf?sfvrsn=a07d3f95_22025-26 eBook(signed and sealed)
Engineers ASME American Society of Mechanical Engineers ASTM American Society for Testing, a specification, test method, or other code or recommendation of the particular authority or organization shown. Use standards, specifications, test methods, or other codes as specified, : 01462F49-70F3-43C6-87DB-A667BF011F5C Laboratory. The official testing laboratory used
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/specifications/by-year/fy-2025-26/ebook/2025-26-ebook(signed-and-sealed).pdf?sfvrsn=bcbe5fad_15480206FHWA
this Section. Have the backfill material tested for every soil type for pH, resistivity, sulfate and chloride content by a Department approved independent testing laboratory prior to placement, the following electro-chemical test criteria for determining corrosiveness: Criteria Test Method
https://fdotwww.blob.core.windows.net/sitefinity/docs/default-source/programmanagement/implemented/workbooks/history/jul19/files/5480206fhwa.pdf?sfvrsn=1266a80c_2