Local Agency Specifications Archive - Asphalt


Local Agency Specifications Archives


Dan Hurtado , State Specification Engineer
Phone: (850) 414-4130
Fax (850) 414-4199


 Archived Asphalt Specifications for Local Agency Use


NOTE: You may need Microsoft Word Viewer to view files on this page.

Specifications available through this site are archived specification files no longer approved for use by the Florida Department of Transportation. These specifications have either been superseded by other implemented specifications (such as Contractor Quality Control (CQC) Specifications or newer technology) or represent materials and technology no longer in use on the State Highway System. They are made available as a convenience to Local Agencies for reference, modification and/or potential use on their projects.

NOTE: They MAY NOT BE USED on FDOT projects.

CAUTION: Since these files are obsolete as FDOT Specifications, cross-references within the text of these files to other FDOT Specification Sections, Articles and/or Sub articles may not be valid. All cross-references must be verified and/or modified by the user to provide proper coordination with other specifications being considered for concurrent use.

NOTE: (If you are prompted to: Please enter your authentication information, please click on CANCEL and proceed. This is a glitch caused by Microsoft.)

TitleDescription
Asphalt Base CoursesThis Specification covers the requirements of constructing asphalt base courses.
Bituminous Surface Treatment (Including Mineral Seal Coat)This Specification covers the requirements of constructing a wearing surface composed of separate applications of bituminous material covered with aggregate, either in single applications, double (alternate) applications, or triple (alternate) applications.
Sand Seal CoatThis Specification covers the requirements of constructing a sand seal coat composed of bituminous material applied in one application and covered with sand cover material applied in a single application.
Bituminous Crack Relief LayerThis Specification covers the requirements of constructing a crack relief layer composed of a separate application of bituminous material covered with a single application of aggregate.
Type S Asphalt Concrete This Specification covers the requirements of constructing a Type S-I, Type S-II or Type S-III Asphalt Concrete as specified by the Contract.
Type II Asphalt ConcreteThis Specification covers the requirements of constructing a Type II Asphalt Concrete pavement.
Type III Asphalt ConcreteThis Specification covers the requirements of constructing asphalt concrete pavement course composed of a mixture of stone or slag screenings with silica sand and asphalt cement, and mineral filler if needed.
Superpave Asphalt ConcreteThis Specification covers the requirements of constructing a Superpave Asphalt Concrete course using the type of mixture specified in the Contract, or when offered as alternates, as selected. Superpave mixes are identified as Type SP-9.5, Type SP-12.5 or Type SP-19.0.
Sand-Asphalt Hot MixThis Specification covers the requirements of constructing a Sand-Asphalt hot mix base course, leveling course, or surface course.
Asphalt Concrete Friction CourseThis Specification covers the requirements of constructing a Asphalt Concrete Friction Course.